Specifications

PA/4000 User’s Manual
Section 7, Fonts and Bar Codes
Page 16
Bar Code F
Identifies the standard EAN-13 bar code, Numeric-only bar code; fixed in length.
Twelve digits are supplied by host or application software, 13th digit checksum
supplied by printer. If the 13th digit is sent by the host, the printer will check that
character against the calculated checksum and will print the bar code as all zeros if they
do not match. Addendum codes for this font are described by fonts M and N. The
normal ratios that the printer can print are 1:1, 2:2, 3:3, 4:4, 6:6 and 8:8. These ratios
actually specify size of elements since EAN type bar codes are element based and not
ratio based. Maximum 12 bar codes per label.
Prodigy Plus Prodigy Plus 152
Bar Code G
Identifies the truncated EAN-8 bar code. Numeric-only bar code; fixed in length.
Seven digits are supplied by host or application software, 8th digit supplied by printer.
If the 8th digit is sent by the host, the printer will check that character against the
calculated checksum and will print the bar code as all zeros if they do not match.
Addendum codes for this font are described by fonts M and N. The normal ratios that
the printer can print are 1:1, 2:2, 3:3, 4:4, 6:6 and 8:8. These ratios actually specify size of
elements since EAN type bar codes are element based and not ratio based.
Prodigy Plus Prodigy Plus 152