Specifications

PA/4000 User’s Manual

Section 8, Printing Labels with Performance Series for Windows

Page 4

Set the Presentation Position to 0.

(May need to be adjusted. If you are driving the PA4000 directly

with custom software, set the DIP switch positions DSW1 as shown

below).

SW1-1 Depends on RS-232 Baud Rate

SW1-2 Depends on RS-232 Baud Rate

SW1-3 Depends on RS-232 Baud Rate

SW1-4 depends on number of databits

SW1-5 OFF PA4000

SW1-6 ON Enable label present sensor*

SW1-7 OFF Standard ribbon

SW1-8 ON Enable cutter*

*Required

3. Set the Cut Option to 1

4. For label offset of 95 must transmit 0198.

5. For presentation position of 155 must transmit f283.

Refer to Datamax Prodigy Plus

Print Engine programming

guide for more information. The guide can be downloaded free

from www.datamaxcorp.com.

Please note that the offset and presentation position may need to

be adjusted to get label properly dispensed and print position set

correctly.

Click OK to set the new format.

The Performance Series for Windows

Software allows you to control two different

label offsets.

1. All LABEL OFFSET ADJUSTMENT - controls the offset value for

all of the labels in your database. This is found under the Settings -

Printer Configuration menu. Click twice on the printer chosen and

this screen appears: