Specifications

PA/4000 User’s Manual
Section 9, Maintenance
Page 1
9.0 MAINTENANCE
9.1 Daily Maintenance
Clean the Printhead.
! Turn OFF the printer and unplug the unit from the outlet before
cleaning the printhead. Clean the printhead after each
ribbon/label change. Clean with alcohol and swabs.
Clean the Air Filter.
! Purge by cycling the OSHA valve ON and OFF.
! Check air pressure setting.
9.2 Weekly Maintenance
Clean the Label Low Sensor located behind the Label Supply Disc.
!
Blow off with dry shop air to remove dust and adhesive.
Clean the Label Present Sensor on the Tamp Pad.
!
Blow off with dry shop air to remove dust and adhesive.
Clean the Auto-Retract Sensor on the Tamp Pad.
!
Blow off with dry shop air to remove dust and adhesive.
9.3 Monthly Maintenance
Clean the Label Low Sensor located behind the Label Supply Disc.
!
Clean with an alcohol swab.
Clean the Leading Edge Sensor on the Print Engine.
!
Clean with an alcohol swab.
Clean the Ribbon Sensor on the Print Engine.
!
Clean with an alcohol swab.
Clean the Label Rollers and Guides of Label Residue.
!
Clean with an alcohol swab.
Clean the Ribbon Rollers and Guides of Ribbon Residue.
!
Clean with an alcohol swab.