Specifications

PA/4000 User’s Manual
Section 9, Maintenance
Page 2
9.4 Six Month Maintenance
Replace the Vacuum Filter.
!
This filter—6150322—is available in the PA/4000 Filter Kit, 6150-806.
9.5 Intermittent Maintenance
!
Clean the printhead each time the label and/or ribbon is replaced.
!
Replace the printhead when any degradation in print quality is noticed.
CAUTION: Utilize the appropriate safety equipment as prescribed by your
supervisor during the performance of routine periodic maintenance.
WARNING: Loss of air pressure can cause the tamp head assembly to
drop into the path of the oncoming product. This can damage the
PA/4000. To prevent this, be sure there are no products on the line or
pull the PA/4000 away from the line before sliding the air valve to OFF.
9.6 Yearly
Inspect the print engine drive roller for debris, cuts or other wear or damage.
!
!