Datasheet

2-26
Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: [phone] • FAX: [phone] •www.dialight.com
3 x 5mm Rectangular
®
Optopipe
TM
Optical Light Pipe, 4 Array (RJ45 Jack)
515-1022
1.50
[.059]
2.01
[.079]
1.35
[.053]
.99
[.039]
.99
[.039]
46.99
[1.85]
5.08
[.200]
3.05
[.120]
1.91
[.075]
2.54
[.100]
13.9
[.550]
27.94
[1.10]
6.99
[.275]
DIRECTION
OF LIGHT
1.57
[.062]
2.95
[.116] TYP;
(2) PLACES
C.L. of LED
[.111 +.002/-.001]
.71
[.028]
27.94 ±.08
[1.10 ±.002]
TYP;(2) PLACES
13.97
[.550]
31.24
[1.23]
7.62
[.300]
27.43
[1.08]
20.5
[.810]
3.93
[.155
]
FRONT
PANEL
DIFFUSED
FRONT
SURFACE
1.57
[.062]
29.0
[1.142]
C.L. of LED
RECOMMENDED SOLDER PAD/HOLES AND LAYOUT
Dimensions in mm [inches]
NOTE: designed for
post-reflow
PC board insertion.
Recommended
MicroLED SMT LEDs
for use with 515-1022
PART NO. COLOR PAGE #
597-3001-1xx Red 1-19
597-3111-1xx AlGaAs Red 1-19
597-3111-5xx AlGaAs Red 1-30
597-3211-1xx Orange 1-19
597-3211-5xx Orange 1-30
597-3301-1xx Green 1-19
597-3301-5xx Green 1-30
597-3401-1xx Yellow 1-19
597-3401-5xx Yellow 1-30
597-7701-1xx Red/Green 1-20
597-7701-5xx Red/Green 1-31
597-7721-1xx Yellow/Green 1-20
597-7721-5xx Yellow/Green 1-31
597-7731-1xx Red/Yellow 1-20
Features
• Complements Dialight’s 515-1070 Two-Array Optopipe
• Allows indicators to be positioned above corresponding
RJ45 jack or other components
• High transmissivity polycarbonate material
• UL94V-0 compliance
• ESD protection (circuit isolation from front panel)
• Wide viewing angle
• Arrays reduce insertion costs
• Secures to PCB by press-fit
LED Data
For absolute maximum ratings and other
electrical and optical data on the recommended
LEDs, refer to LED data sheets.
Dialight Optopipe Light Pipe Description
This light pipe’s four 3 x 5mm rectangular light emitting surfaces appear bright and are optically well isolated. The light
pipe is reliably held in place by 2 press-fit pins located between the 2 light pipe elements. This Optopipe™ functions as a
through-the-case indicator by conducting the light over the top of connectors or switches. A textured finish on the 4 light
emitting surfaces maximizes the viewing angle. The recommended light sources are Dialight's 597 Series 1210 Type SMT
LEDs. The LEDs are mounted in a straight line on a 0.550" pitch. The light pipe material is water clear transmissive
polycarbonate rated UL94-V0, and has a 35% oxygen index.
Dialight can provide custom Optopipe™ solutions for your applications.
Operating/Storage Temperature
–30°C to +100°C