Datasheet

DRAWING NUMBER
REV
1501 ROUTE 34 SOUTH
FARMINGDALE, NJ 07727
TITLE
MATERIAL
FSCM
FINISH:
ALL DIM'S IN: INCHES (MM)
83330
THIS DRAWING AND THE CONTENTS HEREIN ARE CONFIDENTIAL AND
THE SOLE PROPERTY OF DIALIGHT. REPRODUCTION OF THIS DRAWING
OR CONSTRUCTION OF ANY PARTS WITHIN THIS DRAWING ARE
FORBIDDEN WITHOUT THE WRITTEN CONSENT OF DIALIGHT.
.197
[5]
.340
[8,64]
.040
[1,02]
.040
[1,02]
MAX. EPOXY MENISCUS
.866 MIN.
[22]
.040 MIN.
[1,02]
.020 SQ.
[0,51]
TYP.
.100
[2,54]
NOM.
.230
5,84[ ]
B
5 mm LED YELLOW DIFFUSED
RoHS COMPLIANT
C-17471
SCALE: 6.000
TOLERANCES:
UNLESS OTHERWISE SPECIFIED
FRACTIONS: #1/64
DECIMALS (.XX): #.01
DECIMALS (.XXX): #.005
DECIMALS (.XXXX): #.0005
ANGLES: #1$
SHEET 1 OF 1 FAMILY TABLE:
REV ECN NO REVISIONS DRN CKD APP DATE
A NEW RELEASE SM
MES NO 7-30-07
B
ADDED NOTES 2,3,5 & 6;
DELETED NOTE 2; ADDED LED
SCHEMATIC & ESDS LOGO;
UPDATED SPECS & LED MODEL
AJF KLJ NO 1-7-11
OPERATING CHARACTERISTICS AT 25$C AMBIENT
LED CHARACTERISTICS MIN. TYP. MAX. UNITS TEST CONDITIONS
LUMINOUS INTENSITY 12.6 29.0 40.0 mcd I
F = 10mA
PEAK WAVELENGTH 585 nm
DOMINANT WAVELENGTH 585 590 595 nm
FORWARD VOLTAGE 2.1 2.6 I
F = 20mA
REVERSE CURRENT 100 A V
R = 5V
VIEWING ANGLE 50 DEGREES
ABSOLUTE MAXIMUM RATINGS AT 25 $C AMBIENT VALUE UNITS
POWER DISSIPATION 52 mW
LINEAR DERATING FROM 50 $C 0.25 mA/$C
PEAK FORWARD CURRENT (1/10 DUTY CYCLE, 0.1ms PULSE WIDTH) 60 mA
CONTINUOUS FORWARD CURRENT 20 mA
REVERSE VOLTAGE 5 V
OPERATING TEMPERATURE -55 TO +100 $C
STORAGE TEMPERATURE -55 TO +100 $C
LEAD SOLDERING TEMPERATURE FOR 5 SEC. (.0787" [2mm] FROM BODY) 260 $C
NOTES:
1. DIALIGHT PART NUMBER: 521-9248F.
2. LED COLOR: YELLOW.
3. LENS COLOR: YELLOW DIFFUSED.
4. LEAD SPACING MEASURED NEAR EPOXY PACKAGE.
5. PIN NUMBERS ARE FOR REFERENCE ONLY, DESIGNATION
NON-EXISTENT ON PART.
6. THIS ASSEMBLY CONTAINS ELECTROSTATIC DISCHARGE SENSITIVE
DEVICES (ESDS). MAINTAIN ALL PRECAUTIONARY MEASURES DURING
ASSEMBLY, HANDLING, AND STORAGE IN ACCORDANCE WITH IPC-A-610.
RoHS COMPLIANT 521-9248F
Part Numbers with the "F" suffix ending are RoHS Compliant.
Packaging is marked with "RoHS Compliant" label or equivalent
markings. Parts can be wave soldered, dip soldered or hand
soldered using typical lead-free soldering process with max
260°C temp. for 5 sec.
1
2
CATHODE
CATHODE ID
ATTENTION:
OBSERVE PRECAUTIONS FOR
HANDLING ELECTROSTATIC
SENSITIVE DEVICES
LED SCHEMATIC
PIN 1
CATHODE
PIN 2