ACRYLIC REFLECTOR KIT INSTALLATION FOR LED HIGH BAY Document No: 9100-127-1532-99 Rev A AUGUST 2011 MODEL HBXREF22
Document No: 9100-127-1532-99 Rev A 1: Introduction This Acrylic Reflector kit provides several advantages including glare reduction when side viewing, up lighting and aesthetics for retrofit installations. Part Number HBXREF22 Description of Reflector 22” Acrylic Reflector Note: Save these instructions for future reference.
Document No: 9100-127-1532-99 Rev A • Take the three included hook brackets and 1/4-20 self tapping screws, and fasten them to every other hole located on the top of the High Bay. When screwing brackets into place make sure that the hook of the bracket grabs the top of the Reflector. See image below. Hook Brackets Quantity 3 ¼-20 x 1/2” Form Thread Screws Quantity 3 Page 3 of 4 1501 Route 34 South, Farmingdale, NJ 07727 Tel: (732) 919-3119 Fax: (732) 751-5778 www.dialight.
Document No: 9100-127-1532-99 Rev A DIMENSIONS ARE FOR REFERENCE ONLY. All statements, technical information and recommendations contained herein are based on information and tests we believe to be reliable. The accuracy or completeness thereof is not guaranteed.
