INSTALLATION AND MAINTENANCE MANUAL SAFESITE LINEAR LED LIGHT Document No: 9100-127-1402-99 Rev A October 2010 MODELS LSC3C4D2GEX LSC3C4D3GEX LSC3C4M2GEX LSC3C4M3GEX Figure 1.
Document No: 9100-127-1402-99 Rev A 1: Introduction This Linear LED light is designed for illumination of hazardous areas in industrial locations. It uses the latest in solid state lighting technology for long life, low maintenance, and high efficiency. The unique optical design focuses light downward to where it is needed, giving improved efficiency over a conventional HID luminaire.
Document No: 9100-127-1402-99 Rev A 2: Installation Warning: To avoid the risk of fire, explosion, or electric shock, this product should be installed, inspected, and maintained by a qualified electrician only, in accordance with all applicable electrical codes. Warning: To avoid electric shock: • Be certain electrical power is OFF before and during installation and maintenance. • Luminaire must be connected to a wiring system with an equipment-grounding conductor.
Document No: 9100-127-1402-99 Rev A • Restore power and verify operation. Power Supply Cover Sealing fitting Anti-rotation screw Figure 2. Conduit through Mount (Figure 3) Installation Steps: • • • • For maximum long term reliability and light output, the light must be installed in free air. o The Linear fixture design incorporates an over-temperature control circuit that reduces input power should internal temperatures reach a maximum level. In this event, light output may be reduced.
Document No: 9100-127-1402-99 Rev A Sealing Fittings Anti-rotation Screws Figure 3. 3: Maintenance • To avoid personal injury, disconnect power to the light and allow the unit to cool down before performing maintenance. Warning: No user serviceable parts inside of fixture. Risk of electric shock. Removal of the lens will void the warranty. 1) Perform visual, mechanical and electrical inspections on a regular basis. We recommend routine checks to be made on a yearly basis.
Document No: 9100-127-1402-99 Rev A Glass Lens Figure 4. Specifications Nominal AC Supply Voltage 100-277VAC, 50-60Hz Power consumption: 2’ version 4’ version 50W nominal 100W nominal Operating temperature range -40°F to +149°F [-40°C to +65°C] T5 @ 149°F [65°C] Power factor >0.9 ATHD <20% Dimensions (L x W x H) See Figure 5. Weight 22 lbs [9.98 kg] (4’), 14 lbs [6.35 kg] (2’) Intertek Certified to UL-844 and C22.2 No.
Document No: 9100-127-1402-99 Rev A Figure 5. DIMENSIONS ARE FOR REFERENCE ONLY. All statements, technical information and recommendations contained herein are based on information and tests we believe to be reliable. The accuracy or completeness thereof is not guaranteed.