User's Manual

UM-B-045
DA14580 Range extender v.2 reference application
Company confidential
User manual
Revision 1.1
14-September-2015
CFR0012-00 Rev 1
53 of 60
© 2015 Dialog Semiconductor
6 FCC/IC Certification and CE marking
Standards and conformity assessment 6.1
The Range Extender v.2 module was tested and found compliant by a qualified laboratory to the
following standards:
For FCC/IC certification:
● Complete RF testing according to FCC part 15.247, 15.209.
● FCC Rules and Regulations 47 CFR Chapter I Part 15 Subpart B (10-01-12 Edition) and ICES-
003 ISSUE 5. This covers:
o Continuous Conducted Emission of Power Leads, frequency range 0.15 ÷ 30 MHz.
o Radiated Emission – Electromagnetic field, frequency range 30 MHz ÷ 26 GHz
For CE marking:
● Complete RF testing according to ETSI EN 300 328 v1.8.1
● EMC testing according to EN 301 489-1 V.1.9.2 & EN 301 489-17 V2.2.1
o Radiated Emission- Electromagnetic Field measure. Frequency Range 30 MHz ÷ 6 GHz.
Test standard EN 55022 (2010)/ AC (2011).
o Radiated RF Electromagnetic Field Immunity Test. Frequency Range 80 MHz ÷ 2.7 GHz.
Test standard, EN 61000-4-3 (2006) / A1 (2008) / A2 (2010).
● Electrical Safety testing according to EN 61010-1: 2010
o Electrostatic Discharge Immunity Test. Test standard EN 61000-4-2
● RoHS 2011/65/CE (includes screening for 20 elements).
FCC/IC Regulatory notices 6.2
Dialog Semiconductor has not approved any changes or modifications to this device by the user. Any
changes or modifications could void the user’s authority to operate the equipment.
Dialog Semiconductor n’approuve aucune modification apportée à l’appareil par l’utilisateur, quelle
qu’en soit la nature. Tout changement ou modification peuvent annuler le droit d’utilisation de
l’appareil par l’utilisateur.
This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit
pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
This device complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio
frequency (RF) Exposure rules. This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.