Data Sheet

DA16600MOD Series
Ultra-Low Power WiFi + BLE Combo Module
NDA Confidential
Datasheet
Revision 1.1
15-July-2020
CFR0011-120-00
1 of 26
© 2020 Dialog Semiconductor
General Description
The DA16600 series is a highly integrated ultra-low power Wi-Fi +BLE Combo Module solution. This
module includes the DA16200 which contains an 802.11b/g/n radio (PHY), a baseband processor, a
media access controller (MAC), on-chip memory, and a host networking application processor. It also
has a DA14531 which contains a 2.4 GHz transceiver and an Arm
®
Cortex-M0+
®
microcontroller with
a RAM of 48 kB and a One-Time Programmable (OTP) memory of 32 kB.
The radio transceiver, the baseband processor, and the qualified Bluetooth
®
low energy stack is fully
compliant with the Bluetooth
®
Low Energy 5.1 standard.
The DA16600 is a synthesis of breakthrough ultra-low power technologies, which enables extremely
low power operation in the module. The DA16200 and DA14531 shut down every micro element of
the chip that is not in use, which allows a near zero level of power consumption when not actively
transmitting or receiving data. Such low power operation can extend the battery life up to a year or
more depending on the application. The DA16600 also enables ultra-low power transmission and
reception modes when the SoC needs to be awake to exchange information with other devices.
Advanced algorithms enable sleep mode until the exact moment when wake up is required to
transmit or receive data.
Module Features
Module Variants
DA16600MOD-AAC4WA32 ( Chip Antenna)
DA16600MOD-AAE4WA32 ( u.FL Connector)
Dimensions
14.3 mm × 24.3 mm × 3.0 mm, 51-Pins
Operating temperature range
-40 °C to 85 °C
Wi-Fi Features
Highly integrated ultra-low power Wi-Fi
®
system on chip
Sleep current: 3.5 uA, VBAT=3.3 V
Best RF Performance
Tx Power: +18 dBm, 1 Mbps DSSS
Rx Sensitivity: -97.5 dBm, 1 Mbps DSSS
Full offload: SoC runs full networking OS and
TCP/IP stack
Hardware accelerators
General HW CRC engine
HW zeroing function for fast booting
Pseudo random number generator
(PRNG)
Complete software stack
Comprehensive networking software stack
Provides TCP/IP stack: in the form of
network socket APIs
Built-in 4-channel auxiliary ADC for sensor
interfaces
12-bit SAR ADC: single-ended four
channels
Provides dynamic auto switching function
Wi-Fi processor
IEEE 802.11b/g/n, 20 MHz channel
bandwidth, 2.4 GHz
IEEE 802.11s Wi-Fi mesh
Wi-Fi security: WPA/WPA2-
Enterprise/Personal, WPA2 SI, WPA3
SAE, and OWE
Vendor EAP types: EAP-
TTLS/MSCHAPv2, PEAPv0/EAP-
MSCHAPv2, PEAPv1, EAP-FAST, and
EAP-TLS
Operating modes: Station, SoftAP, and
Wi-Fi Direct
®
Modes (GO, GC, GO fixed)
WPS-PIN/PBC for easy Wi-Fi provisioning
Connection manager for autonomous and
fast Wi-Fi connections

Summary of content (26 pages)