User manual

42
Chapter 5 Parameter Definitions
PCMTYPE The type of PCM in use
One of:
•T1
•E1
PCR Preventive Cyclic Retransmission Y or N Default = N
PER Personality configuration 0 to 255 Default = 0
PERIOD
A period of time in the format:
xx:yy:zz
where:
• xx = 2 digit hour
• yy = 2 digit minute
• zz = 2 digit second
xx – 00 to 23
yy – 00 to 59 (yy must be
00, when xx is 23)
zz – 00 to 59 (zz must be
00, when xx is 23)
PORT
V24 port identifier
NOTE: Port 1 is not physically
accessible.
1 to 4
SNMP destination port for SNMP traps. Default =162
PPORT
The SCTP port associated with the peer
on a SIGTRAN link
1 to 65535
Default =
• 2905 for M3UA
SNLINKs
• 3565 for M2PA
SNLINKs
PRIV SNMP V3 Privacy encryption protocol.
One of:
•DES
•AES
PRIVPASS
SNMP V3 User account Privacy password.
Must be set if the PRIV parameter is
used.
8 to 12
Must be set if the PRIV
parameter is used.
PRTYPE
The type of periodic report:
• MSC7 – periodic reporting of traffic
measurements for CCS SS7 links.
• MSPCM – periodic reporting of traffic
measurements for PCMs.
• MSSL – periodic reporting of traffic
measurements for SIGTRAN links.
• MSEP – periodic reporting of
Ethernet port measurements.
• MSSY – periodic reporting of System
measurements.
One of:
•MSC7
•MSSL
• MSPCM
•MSEP
•MSSY
PTMODE Mode for serial port
One of:
•NONE
•DTRDSR
•TELNET
Default =
• DTRDSR for ports
1and 2
•TELNET for ports
3and 4
QUIESCE SNMP object transition state.
One of:
•All
•Create
•Change
•Destroy
•None
Traps will be generated
if set to All, Create,
Change or Destroy.
Traps will not be
generated if set to
NONE.
Default = Change
RANGE CIC range 0 to 4095
RAS
Logical reference for a SIGTRAN Remote
Application Server
1 to 200
RC
The routing context of a SIGTRAN link
within an Application Server
0 to 2147483647
RCOM
Read only Community String. The
Signaling Server SNMP agent will silently
discard received PDUs that have a
community string not identical to this
value.
A maximum 12
alphanumerical characters.
Default value = 'public'
RDC Remote Data Center (RDC) identifier 1 to 4
Table 3. Parameter Definitions (Continued)
Name Description Range Notes