User`s guide

Dialogic
®
System Release 6.0 PCI for Windows
®
Release Update, Rev 62 — January 30, 2008 305
Dialogic Corporation
Resolved IPY00007686 31991 84 DM3 Network When configuring inter-board NFAS where the
Primary and Secondary D channel are on separate
boards, NFAS trunks on the board with the Secondary
D channel cannot make or accept calls. However,
NFAS trunks on the Primary D channel board (intra-
board NFAS) are not affected and calls can
successfully be placed.
If the Data Link on the Primary D channel is taken
down, the Standby D channel does not sucessfully
take over and now NFAS trunks on the both boards
cannot make or accept calls.
Resolved IPY00007370 27563 18 DM3 Network When using the DMS100 protocol, after a RESTART
message is received, all B-channels are put Out Of
Service and all inbound calls are rejected with Cause
code 44, channel busy.
Resolved IPY00007288 27764 18 DM3 Network Outbound calls fail when the ALERTING message
contains a Non-Locking Shift IE.
Resolved IPY00007269 32571 27 DM3 Network In a glare condition, a local DISCONNECT message
with reason WRONG_MSG_FOR_STATE was
received. The reason should be some other Q.931
cause code.
Resolved IPY00038533 -- 160 DM3 Runtime
Libraries
An internal parameter is not decremented correctly
when a process exits, causing failures in opening
devices.
Resolved IPY00040832 -- 174 DM3 Voice TEC_STREAM event is not returned to the application
when ec_stopch( ) is called after dx_unlisten( ) is
performed on that voice channel.
Resolved IPY00040685 -- 174 DM3 Voice ATDX_TRCOUNT( ) returns the wrong value when
playing a GSM 6.10 WAVE file on Dialogic
®
DM3
Boards.
Resolved IPY00039586 -- 166 DM3 Voice ERROR_BROKEN_PIPE error internal message is
reported in RTF logs during a streaming to board play.
Resolved IPY00039412 -- 166 DM3 Voice TDX_PLAY is not generated to the application during
streaming to board play; dx_GetStreamInfo( ) is not
returning correct information.
Resolved IPY00038981 -- 166 DM3 Voice TDX_PLAY is not generated to the application during
streaming to board play; dx_GetStreamInfo( ) is not
returning correct information.
Resolved IPY00038611 -- 160 DM3 Voice When using the dx_playtone( ) function with
TONEON or TONEOFF as the terminating condition,
when the TONEON or TONEOFF event occurs, the
program gets a TDX_ERROR event instead of
TDX_PLAYTONE event.
Resolved IPY00038435 -- 160 DM3 Voice Channels hang and are not able to recover once in a
CS_STOPD state.
Table 9. Issues Sorted By Type, Dialogic
®
System Release 6.0 PCI for Windows
®
(Continued)
Issue Type Defect No.
PTR
No.
SU
No.
Dialogic
®
Product(s) or
Component(s)
Description