- Dialogue Technology Corp. Laptop User Manual

Troubleshooting

No audio output

1. The audio system is closed or the volume of audio sys-

tem is too low. Use hot keys or Flybook Control Center

to open the audio system and adjust the volume.

2. The audio output is disabled or too low for the audio

application. Open the audio output and adjust the vol-

ume.

3. When plugging an earphone or external speaker into

the earphone/line-out jack, the built-in speakers are dis-

abled automatically. If you can not hear sound from the

built-in speakers, ensure that nothing is plugged into the

jack.

The keyboard, pointing device or connected mouse

does not work properly

1. The system may have entered Suspend to RAM mode.

Push the power button to resume the system.

2. An application may have locked out your input device.

Restart your system.

3. If the keyboard or mouse does not respond on the USB

port, ensure that the devices are installed properly and

that drivers are installed.

Cannot connect to a wireless LAN

1. An incorrect network name (SSID) or network key may

be used. Make sure you have set the network name

(SSID) and key to the same values as the access point

(infrastructure connection) or the computers to be con-

nected (Ad Hoc connection) have.

2. The computer may be too far from other communication

devices. Retry the connection after moving your com-

puter closer to the computers to be connected with (Ad

Hoc connection) or to the access point (infrastructure

Flybook V5_User's Guide_V1.0.book Page 70 Thursday, February 8, 2007 3:44 PM