6.
SPECIAL THANKS Dear Valued Customer, All of us at Diamond Audio would like to thank you for your purchase of a HEX™ Pro speaker system. HEX™ Pro component systems and subwoofers are the very best speakers available for use in the automobile environment. By choosing these products you recognize the value in using only the best. With our proprietary HEX™ cones and neo motors that utilize our patented TDX™ technology, we know you will be satisfied with these systems for years to come.
TDX™ TECHNOLOGY Thermal-Dyne eXtreme™ is a fundamentally different solution. The concept is simple, eliminate the detrimental effects of heat in a loudspeaker system. The solution however, is quite complex. Our engineers decided to start with a fresh sheet of paper and build a new line of products that addressed the thermal problems and shortcomings of conventional designs while significantly raising the existing level of performance.
FEATURES ™ • TDX Technology (Thermal Dyne eXtreme)™ FEATURES • Proprietary Kevlar™/Nomex™ Hex™ Cone • Butyl Rubber TDX Surround Technology™ (Thermal Dyne eXtreme)™ ™ Spider™/Nomex with Embedded Lead Wires • Flat Blended Nomex™Kevlar Proprietary Hex Cone • Die-cast Aluminum Frame Nitrile Butadine Rubber (NBR) Surrounds • Ultra-highFlat Energy Neodymium Magnet Blended Nomex™ SpiderStructure with Embedded Lead Wires • 30mm Polymer Treated Alloy Domed Tweeter Die-cast Aluminum Frames • Precision Ultra-high Mode
6.5” COMPONENT SPEAKERS Product Owners Manual MOUNTING MOUNTING Mid-Bass Mounting The illustration above shows the parts included and correct mounting assembly of the HEX™ Pro component mid-bass drivers. Be sure to check the available mounting depth before installation begins. Use of the foam gasket is recommended to ensure a proper seal between the speaker and MOUNTING mounting surface.
CROSSOVERS CROSSOVERS Each HEX™ Pro component system comes with a pair of programmable crossovers. These crossovers CROSSOVERS Each HEX™ Pro component set comes with a pair of programmable crossovers.
850 n/a 7 n/a 8 75/150 HP650M HP650T 90 93 0.62 N/A 60 850 HP650M HP650T 10.0 N/A 6.5” / 166mm3.30 2.6” / 66mm 7 5.76” / 146mm 42” / 51mm N/A 6.2” / 157mm 42.25” / 57.15mm 8 2.5” / 63mm150/300 0.75” / 19mm75/150 3.5” / 89mm 1.1” / 28mm 48 12.5 3.5 8 4 200/400 Fs (Hz) Vas (L) THIELE/SMALL PARAMETERS Re (ohm) Xmax (mm) Impedance (ohm) Power (watts) NOM/MAX Parameter (unit) Sensitivity - 2.
LIMITED SPEAKER WARRANTY STATEMENT Diamond Audio Technologies, LLC (DAT) warrants this product to be free from defects in material and workmanship for a period of one (1) year from the original date of purchase provided it was purchased from an authorized DAT retailer within the United States. However, if this product was installed by the authorized DAT retailer, the warranty period will be extended to three (3) years.
