User manual

Diamond Multimedia TVW750PCIE

Installation

Installation of the PCI Express device

To install the TVW750 PCI Express board make certain that the computer

is turned off. Proceed with the following steps to install the PCI Express

card into your PC system:

1. Turn off the PC.

2. Open the case of your computer to locate the PCI Express slots.

3. Now you have to choose a free PCI Express slot. If possible choose a

different slot than the slot next to your AGP connector.

4. Unscrew the metal dust protector of the slot you have chosen.

5. Insert the TVW750 tuner board into the PCI E slot.

Figure 2.1: Inserting the DTV board into a PCI EXPRESS

slot

6. Tighten the screw on the Hybrid ATSC/QAM TVW750 board.

7. Repeat the steps 3 to 6 for any additional PCI Express card you want to

install.

8. Close the case of your computer case.

Your Hybrid ATSC/QAM TVW750 hardware is installed now

Installing the driver and software

Summary

In this chapter the installation of Hybrid ATSC/QAM TVW750 PCI

EXPRESS is exemplary described for the operating system Windows XP

Professional Service Pack 2. The installation for the other operating

systems as Windows 2000 is similar.