CONCRETE SAW PARTS LIST MODEL CC3500J APRIL 2014 Part #1801378
WARNING The engine exhaust from this product Contains chemicals known to the State of California to cause cancer, Birth defects or other reproductive harm. Proposition 65 State of California Warning ! Engine exhaust and some its constituents are known to the State of California to cause cancer, birth defects, and/or other reproductive harm.
Table of Contents Controls Legend………………...……………4 Throttle Assembly (Briggs-Vanguard)………31 Quick Reference Service Filters / Belts…….. 5 Belt Drive Assembly…………………………32 - 35 Frame Upright Assembly…………………… 6 Frame Lift Assembly…………………………36 Instrument Panel Assembly………………… 8 Belt Guard Assembly……………………….. 37 Control Grip Assembly………………………9 14" Blade Guard Assembly………………… 38 Control Lever Assembly (Eaton)…………… 10 20" Blade Guard Assembly………………… 40 Battery Assembly…………………………..
Controls Legend 1 Hour Meter 11 Spotlight Switch (Optional) 2 Choke Control 12 Water Valve 3 Vernier Throttle Cable 13 Emergency Stop Button 4 Ignition Switch 14 Handle Lock Knobs 5 Pre-Cleaner 15 Lowering Speed Meter Valve (Optional) 6 Air Cleaner Restriction Indicator 16 Speed Control Lever 7 Depth Stop Knob 17 Raise Pushbutton 8 Cutting Depth Indicator 18 Lower Pushbutton 9 Water Pump Swtch (Optional) 19 Transmission Engagememnt Lever 10 Water Safety Switch (Optional)
Quick Reference Service Filters / Belts Briggs Vanguard 35HP DP Part No. Description Manufacturer's Part No. 2705507 Engine Oil Filter (Briggs #842921) 2702626 Spark Plug (2) (Briggs #491055) 2500201 In-Line Fuel Tank Filter (Fram #G1 or Wix #33001) 2702627 Outer Primary Air Filter (Briggs #841497) 2702628 Inner Safety Air Filter (Briggs #821136) 2500792 Blade Shaft & Jack Shaft Belt (12) (Gates #3VX400) 2505358 Eaton Transmission Belt ( #4L580K) Kohler 40HP DP Part No.
Frame Upright Assembly #6011415 17 13 9 16 10 21 20 ? 10 18 12 8 8 12 14 12 22 15 19 11 23 2 5 12 23 3 6 4 7 1 4 7 6
Frame Upright Assembly #6011415 ITEM 1 PART NO. 6011401 QTY. 1 DESCRIPTION Frame Upright Weldment 2 2900005 2 Cap Screw, Hex Hd., 3/8-16 x 1" 3 4 2900014 2900018 2 2 Flat Washer, 3/8" SAE Locknut, 3/8-16, Nylon 5 2900025 4 Cap Screw, Hex Hd.
Instrument Panel Assembly #6011381 (Includes Items #1 - 3 and 8 - 18) 14 13 8 12 17 8 5 4 6 11 10 9 15 16 7 3 18 2 1 8 ITEM PART NO. QTY.
Control Grip Assembly #6010319 3 1 4 2 4 6 7 8 5 9 ITEM PART NO. QTY. DESCRIPTION 1 2501280 1 Control Grip Body 2 2501281 1 Control Grip Cover 3 2500644 1 Plug, Rectangular 4 2500694 2 Plug, 5/8" Hole 5 2800372 1 Pushbutton Switch, Raise 6 2800373 1 Pushbutton Switch, Lower 7 8 9 2900453 1 Set Screw, Soc. Hd., M5 x 12mm 2900452 1 Machine Screw, Oval Hd.
Control Lever Assembly #6011417 (Eaton) 2 2 2 14 16 3 4 3 5 4 1 13 5 17 9 7 8 15 9 9 5 10 11 12 7 2 6 10 ITEM PART NO. QTY 1 6011410 1 DESCRIPTION Lever Support Weldment 2 2900144 5 Cap Screw, Hex Hd.
Battery Assembly #6011418 18 18 14 22 21 20 19 15 17 12 9 21 20 16 22 11 7 19 8 5 3 13 3 10 3 4 6 2 4 1 ITEM PART NO. QTY. 1 6010670 1 Battery Platform 2 6010554 1 Battery Support Brace 3 2900019 5 Cap Screw, Hex Hd.
Hydraulic Pump Assembly #6011077 (Includes Items #1 - #11) 2 3 11 10 9 4 1 8 11 10 9 7 6 5 12 13 14 12 ITEM PART NO. QTY. 1 2600070 1 Hydraulic Pump Unit 2 2700321 1 Breather Cap 3 3200120 1 Pipe Coupling, 3/8" NPT 4 3200123 1 Pipe Nipple, 3/8" NPT x 2" 5 3200115 1 Elbow, 3/8" O-Ring to 1/4" F. Pipe 6 3200060 1 Hex Nipple, 1/4" NPT 7 3200056 1 Flow Control Valve, 1/4" NPT 8 3200057 1 Elbow, 1/4" M. Pipe to 1/4" M.
Depth Indicator Assembly #6010214 9 5 8 1 3 7 6 4 7 4 2 10 11 12 13 15 14 ITEM 1 PART NO. 6010092 QTY. 1 2 2500155 2 DESCRIPTION Depth Indicator Mount Bracket Cable Pulley, 1-1/4" 3 2900008 2 Cap Screw, Hex Hd., 1/4-20 x 1" 4 2900010 4 Lock Nut, 1/4-20 Nylon 5 2900144 2 Cap Screw, Hex Hd., 1/4-20 x 3/4" 6 2500145 1 Flange Bearing, 3/8" 7 8 2900014 6010091 3 1 Flat Washer, 3/8" SAE Depth Indicator Pointer 9 2900079 1 Cap Screw, Hex Hd.
Depth Stop Assembly #6010215 5 6 4 3 2 1 9 11 8 10 7 14 ITEM 1 PART NO. 6010097 QTY. 1 DESCRIPTION Depth Stop Weldment 2 2900665 4 Belleville Washer, 1/2" 3 2900058 1 Flat Washer, 1/2" SAE 4 5 2900239 6010095 1 1 Friction Washer, 1/2" Depth Stop Knob 6 2900132 1 Roll Pin, 3/16" x 1-1/4" 7 8 2900158 2900084 1 1 Yoke, 1/2-13 Lock Washer, 1/2" Split 9 2900037 1 Hex Nut, 1/2-13 10 2900007 1 Clevis Pin, 1/2" Dia.
Water Supply Assembly #6011419 10 12 6 11 12 5 7 4 3 14 8 13 14 13 1 2 3 6 9 7 8 ITEM PART NO. QTY. 1 6090067 1 DESCRIPTION Water Supply Tube 2 3200045 1 Pipe Tee, 1/2" NPT 3 3200008 2 Close Nipple, 1/2" NPT 4 3200022 1 Fitting, 1/2" F. Pipe to 3/4" F. Garden 5 3200025 1 Hose Filter Washer 6 3200013 2 Street Elbow, 1/2" NPT 7 3200027 2 8 3200155 2 Water Valve Fitting, 1/2" M. Pipe to 3/4" M.
Frame Base Assembly #6011422 8 4 7 1 2 3 5 4 2 3 6 16 4 ITEM PART NO. QTY. DESCRIPTION 1 6011400A 1 Frame Base 2 6011021 2 Skid Plate 3 4 2900473 2900006 4 5 Flat Washer, 3/8" USS Lock Washer, 3/8" Split 5 2900196 2 Cap Screw, Hex Hd., 3/8-16 x 3/4" 6 2900005 2 Cap Screw, Hex Hd., 3/8-16 x 1" 7 8 6010022 2900047 1 1 Rear Pointer Cap Screw, Hex Hd.
Hydraulic Cylinder Assembly #6010714 4 7 4 6 4 3 5 4 1 2 ITEM PART NO. QTY. DESCRIPTION 1 2500177 1 Hydraulic Cylinder 2 6010031 1 Cylinder Pin, 3" 3 6010119 1 Cylinder Pin, 3-1/2" 4 2900064 4 Hair Pin Cotter, 3/4" 5 3200067 1 Cylinder Breather, 1/4" NPT 6 3200057 1 Elbow, 1/4" M. Pipe to 1/4" M.
Rear Drive Assembly #6011461 (Eaton) 12 5 6 13 27 14 18 15 17 2 27 27 19 20 13 14 15 1 16 21 11 26 10 23 13 3 25 28 13 24 30 9 19 31 4 32 7 20 33 21 20 22 18 29
Rear Drive Assembly #6011461 (Eaton) ITEM PART NO. QTY. DESCRIPTION 1 2 6010068 6010027 1 1 Transmission Platform Weldment Mount Foot, Right Hand 3 6011408 1 Mount Foot, Adjustable 4 2500159 2 Pillow Block Bearing, 3/4" 5 2900005 4 Cap Screw, Hex Hd., 3/8-16 x 1" 6 2900006 4 Lock Washer, 3/8" Split 7 6011442 1 Transmission Jackshaft Assembly 8 6048229 1 Key, 3/16" Sq.
9 6 5 22 21 Eaton Transmission Assembly #6011460 24 23 20 8 7 3 4 2 13 14 22 15 21 16 1 17 20 18 10 19 11 20 12 ITEM PART NO. QTY. DESCRIPTION 1 2600068 1 Eaton Hydrostatic Transmission 2 3200046 2 Fitting, 3/8" F. JIC to 3/8" Push Lock 3 6010060 1 Oil Recirculation Hose, 3/8" I.D.
Linkage Assembly #6011425 3 7 7 3 11 6 8 7 6 7 3 10 3 9 7 3 7 7 3 7 7 8 5 12 11 9 7 7 6 10 4 ITEM PART NO. QTY DESCRIPTION 1 6011407 1 2 2900013 2 Extension Bar Cap Screw, Hex Hd., 3/8-16 x 1-1/4" 3 2900018 9 Lock Nut, 3/8-16 Nylon 4 6011406 1 Bell Crank 5 2900153 2 6 2900029 5 Friction Washer, 3/8" Cap Screw, Hex Hd., 3/8-16 x 1-1/2" 7 2900014 14 8 2900047 2 Flat Washer, 3/8" SAE Cap Screw, Hex Hd.
Front Axle Assembly #6011070 10 9 8 7 1 5 6 3 2 ITEM 1 22 PART NO. 6011003 QTY. 1 3 DESCRIPTION Front Axle Weldment 2 2500299 2 Wheel, 6" Front 3 2900295 4 Flat Washer, 1" SAE 4 2500009 2 5 2900431 2 Set Collar, 1" ID Set Screw, Sq. Hd., 5/16-18 x 1/2" 6 2500158 2 Pillow Block Bearing 1-1/4" 7 2900058 4 8 2900084 4 Flat Washer, 1/2" SAE Lock Washer, 1/2" Split 9 2900025 4 Cap Screw, Hex Hd.
Rear Axle Assembly #6011402 (Eaton / Gear) 6 5 7 4 3 1 5 2 12 8 9 10 11 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 PART NO. 6011403 2500158 6010024 2900058 2900084 2900139 6048134 6011019 6010026 2900031 2900019 2900025 QTY. 1 2 2 4 6 4 2 2 2 4 4 2 DESCRIPTION Rear Axle Weldment w/46 Tooth Gear Pillow Block Bearing 1-1/4" Rear Axle Bearing Spacer, 1/8" Flat Washer, 1/2" SAE Lock Washer, 1/2" Split Cap Screw, Hex Hd., 1/2-13 x 1-3/4" Key, 1/4" Sq.
Blade Shaft Assembly #6011735 12 15 * 6 5 9 7 8 2 5 6 11 2 3 7 10 8 4 9 1 13 14 * NOTE 2901569 FOR LH THREADED BOLTS ONLY 2900412 FOR RH THREADED BOLTS ONLY 4 10 1" ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 24 1.2" PART NO. 6011002 6010040 6011058 2500151 2900709 2900512 2900113 2900002 2900418 6010255 6047907 2900130 6010765B 2900711 2901569 QTY. 1 2 1 2 2 4 4 4 2 2 1 1 1 1 1 * 2900412 Shown on Belt Guard Assembly #6011728 page DESCRIPTION Blade Shaft Key, 1/4" Sq.
6011388 FUEL TANK ASSEMBLY 10 12 7 9 11 8 16 Kohler 40HP Fuel Line Shown (Assembled) 19 1 View A 2 17 6 13 5 6 7 TO FUEL FILTER ON ENGINE. 5 4 3 14 15 16 FRAME SHOWN AS REFERENCE ITEM PART QTY. DESCRIPTION Fuel Line Hose - 1/4" x . . . Briggs/Vanguard 35HP - 20" Lg. Kohler 40HP - 20" Lg. ITEM PART QTY. DESCRIPTION 1 2505531 1 Fuel Tank, 5.
Engine Base Assembly 6011712 12 22 23 19 31 32 10 9 11 7 30 1 8 16 28 40 36 14 37 33 39 35 16 20 13 35 32 18 19 24 38 14 25 15 35 41 14 36 34 17 4 26 4 39 2 6 21 3 23 29 TO BLADE SHAFT BEARINGS 26 27 5
6011712 Parts List ITEM 1 PART NO. 6011707 QTY. 1 DESCRIPTION Engine Base Weldment CC3500J 2 3 4 5 6 7 2900058 2900127 2900026 2900499 2900288 2500159 2 2 4 3 1 2 Flat Washer, 1/2" SAE Flat Washer, 1/2" USS Lock Nut, 1/2-13 Nylon Cap Screw, Hex Hd., 1/2-13 x 1-1/2" Cap Screw, Button Hd., 1/2-13 x 2" Pillow Block Bearing, 3/4" 8 9 10 6011710 2500731 6010034 1 2 1 Pivot Plate, Jack Shaft CC3500J Pillow Block Bearing 1-1/2" Key, 3/8" Sq.
Engine Assembly #6011714 - 40HP Kohler To Vent Cap on Fuel Tank 10 13 3 2 4 ? 12 9 11 10c 10d 10f 10b 14 10e 10a 17 A 5 7 16 18 28 DETAIL A SCALE 2 : 9 ITEM 1 2 3 4 5 6 7 8 9 10 10a 10b 10c 10d 10e 10f 11 12 13 14 15 16 17 18 15 8 6 5 Battery Ground PART NO. 2600606 2705825 2705826 2705828 3200234 6011736 3200206 3200031 6011027 6012195 6012195A 6012195B 3200231 3200210 3200390 3200062 2705827 2500186 2706087 2900060 2900079 2900006 2900014 2900018 QTY.
Engine Assy. #6011732 - 35HP Briggs/Vanguard 3 5 22 23 9 1 4 7 8 25 11d 11c 11b 21 24 17 15 7 11a 6 10 14 2 12 18 16 13 15 19 Right-Rear Corner (Battery Ground) 19 ITEM PART NO. 1 2600635 2 6011027 3 3200117 4 3200099 5 2500423 6 3201890 7 3201891 8 6011736 9 3201496 10 2901319 11 6012203 11a 6012203A 11b 3200231 11c 3200210 11d 3200390 12 6011749 13 2501434 14 2500201 15 2900014 16 2900079 17 2900596 18 2900006 19 2900018 20 6049053 ITEM PART NO.
Throttle Assembly, 40HP Kohler #6011739 3 2 1 4 ITEM 1 2 3 4 30 PART NO. 2500376 2500940 2900015 2900017 QTY. 1 1 2 2 DESCRIPTION Vernier Throttle Cable, Kohler, 40HP Throttle Cable Clamp Machine Screw, Hex Hd.
Throttle Assembly, 35HP Briggs-Vanguard #6011738 2 3 4 5 1 6 ITEM 1 2 3 4 5 6 PART NO. 2503833 2900309 2900767 2900926 6011340 2501189 QTY. 1 1 1 1 1 1 DESCRIPTION Throttle Controller Cap Screw, Hex Hd., M5 x 20mm Lock Washer, M5 Split Washer, M5 Cable Clamp, Throttle Wire Stop w/ #8-32 x 3/8" Hex Hd.
6011721 14" Belt Drive Assembly 1 TO TRANSMISSION PULLEY 2 1 8 6 7 5 10 9 1 4 3 32 ITEM PART NO. QTY. 1 2900142 10 Set Screw, Soc. Hd., 5/16-18 x 3/8" DESCRIPTION 2 6011008 1 Sheave, 3.65" x 6 Groove x 1-7/16" Bore 3 6011009 1 Sheave, 3.65" x 6 Groove x 1-3/4" Bore 4 2500792 6 V-Belt, 3VX400 5 6 2501872 2506462 1 1 V-Belt, 4L600W Sheave, 3V x 6.
6011722 20" Belt Drive Assembly TO TRANSMISSION PULLEY 2 7 5 9 6 4 6 8 4 1 3 ITEM PART NO. QTY. DESCRIPTION 1 2900142 10 Set Screw, Soc. Hd., 5/16-18 x 3/8" 2 6011008 1 Sheave, 3.65" x 6 Groove x 1-7/16" Bore 3 6011009 1 Sheave, 3.65" x 6 Groove x 1-3/4" Bore 4 5 2500792 2506454 12 1 V-Belt, 3VX400 Sheave, 3V x 8.0" x 6 Groove Taper Style 6 2506455 2 Taper Bushing, 1-1/2" w/Setscrews 7 6011458 1 Pulley, Accessory Drive 8 2503926 1 Sheave, 3V x 5.
6011723 26" Belt Drive Assembly 1 2 TO TRANSMISSION PULLEY 1 6 8 7 5 4 9 7 4 1 3 34 ITEM PART NO. QTY. 1 2900142 10 Set Screw, Soc. Hd., 5/16-18 x 3/8" DESCRIPTION 2 6011008 1 Sheave, 3.65" x 6 Groove x 1-7/16" Bore 3 6011010 1 Sheave, 4.12" x 6 Groove x 1-3/4" Bore 4 2500792 12 V-Belt, 3VX400 5 6 2501872 2506454 1 1 V-Belt, 4L600W Sheave, 3V x 8.
6011724 30" Belt Drive Assembly 1 2 1 TO TRANSMISSION PULLEY 8 6 7 5 4 9 4 1 3 ITEM PART NO. QTY. DESCRIPTION 1 2900142 14 Set Screw, Soc. Hd., 5/16-18 x 3/8" 2 6011008 1 Sheave, 3.65" x 6 Groove x 1-7/16" Bore 3 6011010 1 Sheave, 4.12" x 6 Groove x 1-3/4" Bore 4 2500792 12 V-Belt, 3VX400 5 6 2501872 2506454 1 1 V-Belt, 4L600W Sheave, 3V x 8.
Frame LIft Assembly 6011752 8 12 MOUNTS TO TOP OF UPRIGHT, SLOT IS TO FRONT. 5 3 14 7 7 6 13 11 16 15 2 4 9 4 10 MOUNTS DIRECTLY TO FRAME BASE 4 1 9 ITEM PART NO. QTY. 36 DESCRIPTION ITEM PART NO. QTY.
Belt Guard Assembly #6011728 2 6 7 8 8 7 2 6 1 3 4 5 10 3 4 12 5 13 11 * 9 8 7 6 2 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 PART NO. 6011709 6010558 2900473 2900006 2900005 2900022 2900031 2900019 6010555 2900307 2900156 2900146 2900412 QTY. 1 3 3 3 3 6 6 6 1 1 1 1 1 DESCRIPTION Guard, Engine Belt Guard Mounting Tab, 3/8-16 Flat Washer, 3/8" USS Lock Washer, 3/8" Split Cap Screw, Hex Hd., 3/8-16 x 1" Flat Washer, 5/16" SAE Lock Washer, 5/16" Split Cap Screw, Hex Hd.
14" Blade Guard Assembly #6010950 25 22 24 9 23 9 4 11 4 10 21 7 23 24 12 6 8 18 13 20 17 19 3 4 16 2 13 1 6 6 5 14 10 38 15
14" Blade Guard Assembly #6010950 ITEM 1 PART NO. 6010601 QTY. 1 DESCRIPTION 14" Blade Guard Front & Rear Only 2 6010081 1 Splash Flap 3 2900310 2 Cap Screw, Hex Hd., M6-1.0 x 20mm 4 2901494 4 Flat Washer, M6 5 6 2900083 2900302 2 8 Fender Washer, 1/4" x 1-1/4" Lock Nut, M6-1.0 Nylon Insert 7 6010261 1 Water Manifold 8 9 2500830 2901355 1 2 Water Manifold Gasket Cap Screw, Hex Hd., M6-1.0 x 50mm 10 3200001 3 Plug, 1/8" NPT 11 3200002 1 Fitting, 3/8" M. Pipe to 3/4" M.
20" Blade Guard Assembly #6010952 22 9 9 21 4 11 4 10 18 12 7 17 8 23 20 24 6 1 13 3 4 16 2 6 13 19 6 14 10 40 15 5
20" Blade Guard Assembly #6010952 ITEM 1 PART NO. 6010603 QTY. 1 DESCRIPTION 20" Blade Guard Front & Rear Only 2 6010081 1 Splash Flap 3 2900310 2 Cap Screw, Hex Hd., M6-1.0 x 20mm 4 2901494 4 Flat Washer, M6 5 6 2900083 2900302 2 8 Fender Washer, 1/4" x 1-1/4" Lock Nut, M6-1.0 Nylon Insert 7 6010261 1 Water Manifold 8 9 2500830 2901355 1 2 Water Manifold Gasket Cap Screw, Hex Hd., M6-1.0 x 50mm 10 3200001 3 Plug, 1/8" NPT 11 3200002 1 Fitting, 3/8" M. Pipe to 3/4" M.
23 26" Blade Guard Assembly #6010954 26 25 27 22 28 24 11 19 22 10 7 9 8 18 21 4 12 14 13 20 1 3 17 4 2 14 5 6 15 6 11 16 42
26" Blade Guard Assembly #6010954 ITEM 1 PART NO. 6010955 QTY. 1 DESCRIPTION 26" Blade Guard Front & Rear Only 2 6010081 1 Splash Flap 3 2900310 2 Cap Screw, Hex Hd., M6-1.0 x 20mm 4 2901494 4 Flat Washer, M6 5 6 2900083 2900302 2 6 Fender Washer, 1/4" x 1-1/4" Lock Nut, M6-1.0 Nylon Insert 7 6010261 1 Water Manifold 8 9 2500830 2900765 1 2 Water Manifold Gasket Lock Washer, M6 Split 10 2901355 2 Cap Screw, Hex Hd., M6-1.
27 30" Blade Guard Assembly #6010956 30 (Includes Items #1 - #21) 29 31 26 32 26 10 11 28 7 9 19 8 4 18 20 12 14 13 21 1 23 24 17 25 3 4 2 14 15 6 11 44 16 6 22 5
30" Blade Guard Assembly #6010956 (Includes Items #1 - #21) ITEM PART NO. QTY. DESCRIPTION 1 6010957 1 30" Blade Guard Front & Rear Only 2 6010081 1 Splash Flap 3 2900310 2 Cap Screw, Hex Hd., M6-1.0 x 20mm 4 2901494 4 Flat Washer, M6 5 6 2900083 2900302 2 6 Fender Washer, 1/4" x 1-1/4" Lock Nut, M6-1.0 Nylon Insert 7 6010261 1 Water Manifold 8 9 2500830 2900765 1 2 Water Manifold Gasket Lock Washer, M6 Split 10 2901355 2 Cap Screw, Hex Hd., M6-1.
Blade Shaft Weight Assembly #6011720 2 3 2 4 2 3 3 4 4 1 5 46 ITEM 1 PART NO. 6011716 QTY. 1 DESCRIPTION Blade Shaft Weight 2 2900811 3 Cap Screw, Hex Hd.
Dual Front Pointer Assembly #6011540 7 5 8 4 3 6 2 5 1 15 14 6 9 8 10 12 11 13 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 PART NO. 6011537 6011539 2504577 2504581 6011535 2500740 2900013 2900033 6011152 2900005 2900105 2900239 2900026 6017241 3200221 QTY. 1 1 2 1 2 2 2 4 2 2 2 2 2 1 2 DESCRIPTION Front Pointer Frame Pointer Tube, 20" Shaft Collar, 3/4" Split Wheel, 6" Front Pointer Rod, 11" Pointer Cap Cap Screw, Hex Hd., 3/8-16 x 1-1/4" Hex Nut, 3/8-16 Front Pointer Arm Cap Screw, Hex Hd.
Optional Water Pump Assembly #6011032 9 10 1 5 7 6 5 6 8 7 2 3 3 4 8 48 ITEM PART NO. QTY. 1 2600200 1 Water Pump, 12V Diaphragm 2 2900008 4 Cap Screw, Hex Hd.
Optional Water Safety Switch Assembly #6047932 2 3 1 ITEM PART NO.
CC3500J Optional Spot Light Assembly #6011487 8 10 9 7 Upright Console 12 6 11 2 3 5 4 1 50 ITEM 1 PART NO. 6011486 QTY. 1 DESCRIPTION Light Bar Mount Bracket CC3500J 2 6010106 1 Light Bar 3 2500194 1 Spot Light, 12 Volt 4 5 2504922 2900144 2 2 Hand Lock Knob, 5/16-18 x 3/4" Cap Screw, Hex Hd., 1/4-20 x 3/4" 6 2900010 2 Lock Nut, 1/4-20 Nylon 7 2800062 1 Toggle Switch On/Off 8 2800063 1 Switch Boot 9 10 6010098 2900445 1 4 Switch Plate Tap Screw, Flat Hd.
Optional Magentic Spot Light Assembly #6011170 1 2 5 3 2 4 1 DESCRIPTION ITEM PART NO. QTY.
Optional Shaft Tachometer Assembly #6011384 8 15 3 9 13 14 11 1 11 2 4 7 13 11 10 7 6 5 10 11 12 52 ITEM 1 PART NO. 6011382 QTY. 1 DESCRIPTION 2 1801384 1 Instrument Panel Decal (Tach) CC3500J 3 6010416 1 Tach/Hour Meter (VDO) Calibrated 4 5 2800397 6011421 1 1 Tach Sensor Wire Harness Shaft Tach Gear Assembly ITEM 6 PART NO. 6010230 QTY.
Optional Lowering Speed Metering Valve Assembly #6010227 9 1 5 7 2 6 5 3 1 8 4 3 DESCRIPTION ITEM PART NO. QTY. 1 3200211 1 Valve, 1/4" Metering 2 3200212 1 Panel Mounting Kit 3 3200057 2 Elbow, 1/4" M. Pipe to 1/4" M. JIC 4 3200115 1 Elbow, 3/8" O-Ring to 1/4" F. Pipe 5 3200213 2 Tee, 1/4" M. JIC to 1/4" M. Pipe 6 3200219 1 Adapter, 1/4" M. Pipe to 1/4" F.
Optional Parking Brake Assembly #6011228 20 8 23 22 7 23 9 6 19 21 1 15 4 5 22 21 16 10 11 12 54 3 13 17 18 2 14
Optional Parking Brake Assembly #6011228 ITEM PART NO. QTY. 1 2 6011229 2501664 1 1 3 4 5 6 7 8 6011230 6048229 6011231 2900083 2900024 2900082 1 1 1 1 1 1 9 10 6011232 2900473 1 1 11 12 13 14 2900474 2900005 6011234 2900632 1 1 1 1 15 16 17 2900037 2900014 2900006 1 2 2 18 19 2900196 6011233 2 1 20 21 22 23 2500002 2900022 2900019 2900039 1 2 2 2 DESCRIPTION Bearing Housing Bar Ball Bearing, 3/4" x 1-5/8" x 7/16" Pivot Pin Key, 3/16" Sq.
Optional Blade Stacking Assembly #6010630 (Up to 1-1/2" width) 5 14 4 3 9 2 15 12 16 13 18 17 21 23 18 6 22 8 9 20 11 20 7 19 19 11 15 11 56 15 10 1
Optional Blade Stacking Assembly #6010630 (Up to 1-1/2" width) ITEM PART NO. QTY. DESCRIPTION 1 6010159 1 Outer Flange 4-1/2" with Pin 2 2900002 1 Flat Washer, 5/8" SAE 3 2900113 1 Lock Washer, 5/8" Split 4 2900210 1 Cap Screw, Hex Hd., 5/8"-11 x 5" LH 5 6010620 1 20" Wide Blade Guard Assembly ITEM PART NO. QTY. 6 6010621 1 20" Wide Blade Guard Front & Rear Only 7 6010296 1 Splash Flap 8 2900008 2 Cap Screw, Hex Hd.
Optional Blade Spacing Assembly #6010631 (Up to 2" width) 5 4 14 9 2 15 1 12 16 13 3 18 17 21 23 18 6 22 8 9 20 11 20 7 19 19 11 15 11 58 15 10
Optional Blade Spacing Assembly #6010631 (Up to 2" width) ITEM PART NO. QTY. DESCRIPTION 1 6010186 1 Blade Shaft Extension, Left Hand Thread 2 6010187 1 Outer Flange 4-1/2" 3 2900218 1 Dowel Pin, 3/8" Dia. x 3-1/2" 4 2900212 1 Hex Nut, 1"-14 Left Hand 5 6010620 1 20" Wide Blade Guard Assembly ITEM PART NO. QTY. 6 6010621 1 20" Wide Blade Guard Front & Rear Only 7 6010296 1 Splash Flap 8 2900008 2 Cap Screw, Hex Hd.
Optional Blade Spacing Assembly #6010632 (Up to 4" width) 5 4 2 1 24 14 16 9 15 3 12 17 23 13 6 21 22 8 9 7 18 18 11 10 19 11 15 60 11 20
Optional Blade Spacing Assembly #6010632 (Up to 4" width) ITEM PART NO. QTY. DESCRIPTION 1 6010309 1 Blade Shaft Extension, Left Hand Thread 2 6010187 1 Outer Flange 4-1/2" 3 6010359 1 Drive Pin, 3/8" Dia. x 5" 4 2900212 1 Hex Nut, 1"-14 Left Hand 5 6010622 1 20" Wide Blade Guard Assembly ITEM PART NO. QTY. 6 6010623 1 20" Wide Blade Guard Front & Rear Only 7 6010366 1 Splash Flap 8 2900008 3 Cap Screw, Hex Hd.
Wiring Diagram Briggs-Vanguard 35HP Diagram Number Part No. Qty. Req.
Diagram Number Part No. Qty. Req.
DECAL GROUP CORE CUT DECAL #1800256 (Qty.
DECAL GROUP INSTRUMENT PANEL DECAL (STANDARD) #1801382 INSTRUMENT PANEL DECAL (OPTIONAL TACH) #1801384 WARNING DECAL #1800001 67
EQUIPMENT AND PARTS WARRANTY Diamond Products warrants all equipment manufactured by it against defects in workmanship or materials for a period of one (1) year from the date of shipment to Customer.