DIAMOND PRODUCTS FLOOR GRINDER PARTS LIST MODEL CC80 (January 2012) Part #1801138
(Intentionally Blank)
Table of Contents Description Page No. Motor Assembly………………...………………………………………...4-5 Frame Assembly……………………………………………………………6 Flex Coupling Assembly…………..…………………………………… …7 Guard Assembly….………………………………………………..…….…8 Handle Assembly……….………………………………………………….9 Dust Port Assembly………………………….………..…………………. .10 Decal Group…………………………………………………………….….11 Warranty………………..………………………………………………….12 Quick Reference Service Filters/ Belts DP Part No.
MOTOR ASSEMBLY: 6040345 1 17 16 12 3 23 15 14 6 13 4 7 1D 5 1C 8 1E 2 11 22 9 1B 1F 9 10 1A 18 19 21 20
MOTOR ASSEMBLY: 6040345 ITEM PART NO. QTY DESCRIPTION 1 2600594 1 2HP-1 Ph Elec. Motor w/ on/off switch, 20A Plug 2 6048229 1 Key, 3/16" Sq. x 1-1/4" 3 6040532 1 Engine Mounting Plate 4 2500034 2 V-Belt, 3VX315 5 2504694 1 Sheave, 3.35-2 Groove (2-3V-3.35-TB) 6 2500030 1 Taper Bushing, 1" w/ Set Screws 7 2505006 1 Sheave, 5.
FRAME ASSEMBLY: 6040346 9 4 3 8 8 7 8 6 6 6 6 2 8 12 10 13 6 11 5 1 10 12 6 5 5 6 ITEM PART NO. QTY DESCRIPTION 1 2 6040530 6040536 1 2 Frame Weldment Handle Support 3 6040533 1 Pulley Shield 4 2900020 4 Cap Screw, Flat Hd., 1/4-20 x 3/4" 5 2900018 9 Lock Nut, 3/8-16 Nylon 6 7 2900014 2900079 19 4 Flat Washer, 3/8" SAE Cap Screw, Hex Hd., 3/8-16 x 2-1/4" 8 2900005 8 Cap Screw, Hex Hd.
FLEX COUPLING ASSEMBLY: 6040368 3 2 1 * SHOWN AS REFERENCE USE 8" GRINDING HEADS ITEM 1 PART NO. 2503196 QTY. DESCRIPTION 1 Flex Coupling 2 2900911 3 Cap Screw, Soc. Hd.. M8-1.25 x 30mm 3 2900161 3 Cap Screw, Soc. Hd., M8-1.25 x 25mm FLEX COUPLING INSTALLATION: 1. INSTALL (3) M8 X 25 CAPSCREW THROUGH COUPLING INTO GRINDING HEAD 2.
FRONT GUARD ASSEMBLY - 6040340 6 5 4 1 3 8 2 5 7 8 ITEM PART NO. QTY. DESCRIPTION 1 6040529 1 8" Front Guard 2 6040541 1 Rubber Skirt 1/4 x 1-5/8 x 22"L (8" Guard) 3 4 2900526 2900115 4 4 Machine Screw, Hex. Hd., #8-32 x 1/2 Lock Nut, #8-32 Nylon 5 6 2900009 2900010 10 5 Flat Washer, 1/4" SAE Lock Nut, 1/4-20 Nylon 7 2900144 5 Cap Screw, Hex Hd.
HANDLE ASSEMBLY: 6040343 14 2 5 4 3 5 13 8 2 1 4 9 10 12 11 6 7 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PART NO. 6040538 6041062 2900597 2900301 2900016 2900053 2900257 3200022 3200008 3200027 3200155 6048918 3201876 6040521 QTY. 1 2 2 2 6 2 2 1 2 1 1 1 1 1 DESCRIPTION Handle Weldment Throttle Spacer Cap Screw, Hex Hd., M5 x 50mm Lock Nut, M5 Nylon Flat Washer, #10 USS Rivet, 3/32" Dia. Lock Pin, T Handle, 3/8" Fitting, 1/2" F. Pipe to 3/4" F.
DUST PORT ASSEMBLY: 6040344 7 4 1 6 5 3 2 10 ITEM PART NO. QTY. DESCRIPTION 1 6040534 1 Rear Cover 2 3 2900526 2900115 4 4 Machine Screw, Hex. Hd., #8-32 x 1/2 Lock Nut, #8-32 Nylon 4 6040339 1 Hose, 2" ID, 8.5" Long 5 6040537 1 Dust Port Bracket 6 7 2503177 3200095 1 1 Hose Reducer, 2.0"-1.
DECAL GROUP CORE CUT DECAL #1800506 (QTY. 1) GREASE OFTEN GREASE OFTEN DECAL #1800504 (QTY.1) WARNING UNPLUG POWER DECAL #1801075 (QTY.1) s WARNING DECAL #1800001 (QTY.
EQUIPMENT AND PARTS WARRANTY Diamond Products warrants all equipment manufactured by it against defects in workmanship or materials for a period of one (1) year from the date of shipment to Customer.