Instruction manual

4.l.2. Monitor Count Data Collection

The counter displays the first four count lanes you have enabled. Note that the

counter only displays the lanes you have enabled.

While monitoring data collection, the following counter keypad keys can be used:

0 - If just Testing Lanes (i.e. from the Start Collecting option) this key zeros all totals.

ALT 1-8 - You can set piezo sensitivity level with these keys. See section 4.f. for information.

CLEAR - Aborts and returns to the menu.

SPACE - Toggles the screen to show other enabled lanes (if more than four enabled).

An asterisk on the screen indicates that data collection has not yet started.

4.l.3. Monitoring Sensor Data Collection

This is displayed first when the counter is waiting for a sensor pulse.

Each sensor which is activated will be displayed as:

L is the lane #; HH:MM:SS is the time. 13223455 is the count on the 24 bit

internal clock. P On indicates that a sensor (such as a loop) was turned on.

While monitoring, you may press the following keys:

1-8 – Tells the counter to only display the lane number you press.

0 – Tells the counter to display all lanes.

CLEAR – aborts and returns to the menu.

SPACE – Freezes the display. This allows you to view a vehicle for a longer period of time. Press SPACE

again to un-freeze the display.

ALT 1-8 – You can set piezo sensitivity levels with the counter keypad keys. See section 4.f for more

information.

ARROW KEYS – Allows you to see other spacings. Press either arrow keys again and the screen will change to

show up to 6 spacings Press either arrow key again and the screen will return to the original

display. These keys work even when the Freeze Key (Space) has been pressed.

If an asterisk character appears before the lane number, this indicates that collection has not actually started yet,

and the vehicles shown are not being stored in memory until the first Record Interval is reached.