Instruction manual

Select the required mode (Raw, Binned, Count, or Sensor) by using the arrow

keys; Press ENTER. Which mode you select depends on which of the

following examples you are using.

Select this format by pressing ENTER, or select a different format with the

arrow keys and then press ENTER.

Since we want the counter to stop when memory is full, press ENTER to select

No.

The user may select to create new files Manually, Daily, or Weekly. Manually

means that the counter will start a file when you manually start it and will close

the file when you manually stop it. Daily means the counter will create a new

file each day at midnight. Weekly means the counter will create a new file

once per week.

Press the ENTER key to leave at 1200. Use the arrow keys to change.

ENTER to leave at No.

If you selected Count or Sensor mode for the first question, the next three questions are skipped.

Press ENTER for U.S. (i.e. MPH and Feet). To select metric use the left arrow

key.

Press the ENTER key and the classifier will display Sensor Misses on the

screen, but does not store them in memory.

Press ENTER to keep the default value.

This setting allows the counter to record the internal temperature in the unit. By

default this is set to “No”.