Instruction manual

Copyright ©2006 Diamond Traffic Products
ALL RIGHTS RESERVED
63
NOTE: On the Phoenix II/ Unicorn/Pegasus 9 Pin connector, pins #9 and #4 are shorted together and have no wires
inserted, pin #5 and #6 are shorted together, pin #1 is not used, the RTS (#7) and CTS (#8) wires from the 9 Pin
Sub-D are soldered together and then sealed with heat shrink tubing, and pin#2 gets two wires.
Phoenix II/Unicorn/Pegasus External Loop Harness Cable
Front View
Loop Input Number
Wire Pair
Pin
#1
Green/Black
A/B
#2
White/Black
C/D
#3
Red/Black
E/F
#4
Blue/Black
G/H
Phoenix II/Unicorn/Pegasus Remote Air Switch Harness Cable
Name
Wire Color
Pin Number
Input #1
White
A
Input #2
Green
B
Input #3
Black
C
Input #4
Yellow
D
Input #5
Red
G
Input #6
Orange
H
Input #7
Blue
J
Input #8
Brown
K
6 Volts Output
Red
E
Ground
Black
F
NOTE: The Pegasus and Unicorn only support up to 4 inputs.
Phoenix II 8 Input Piezo Electric Harness Cable
Name
Wire Color
Pin Number
Input #1
Red/Black
A
Input #2
White/Black
B
Input #3
Green/Black
D
Input #4
Blue/Black
H
Input #5
Red/Black
K
Input #6
White/Black
J
Input #7
Green/Black
G
Input #8
Blue/Black
C
N/C
N/C
E
Ground
Bare Wire
F