Instruction manual

Copyright ©2006 Diamond Traffic Products
ALL RIGHTS RESERVED
65
Appendix D. Default Bin Tables
This appendix describes the default bin categories that are used with the Phoenix II. These “Bins” are used to total up
all vehicles meeting a predetermined set of criteria. Note that this information is ONLY used if you configure the
Phoenix II to collect data in its Binned Mode. Raw (Per-Vehicle), Sensor (Timestamp), and Count Modes do not Bin
data.
Default Axle Bin Classification Table (Scheme- ‘F’) (defaultx.axl)
Bin Number
Axle Range
Bin Category Name
#1
2
Motorcycles
#2
2-4
Passenger cars
#3
2-5
Other two Axle, 4 tire vehicles (w/ or w/o trailer)
#4
2-3
Buses
#5
2-5
Two Axle, six tire, Single Trailer
#6
3
Three Axle, Single Unit
#7
4
Four Axle, Single Unit
#8
3-4
Four or less Axle, Single Trailer
#9
5
Five Axle, Single Trailer
#10
6-10
Six or more Axle, Single Trailer
#11
5
Five Axle, Multi-Trailer
#12
6
Six Axle, Multi-Trailer
#13
7-13
Seven or more Axle, Multi-Trailer
#14
Undefined
Default Speed and Length Bin Classification Table (defaultx.spd & defaultx.len)
Bin Number
Speed Range
Length Range
#1
0.0-19.9 mph
0.0-5.9 feet
#2
20.0-24.9 mph
6.0-9.9 feet
#3
25.0-29.9 mph
10.0-14.9 feet
#4
30.0-34.9 mph
15.0-19.9 feet
#5
35.0-39.9 mph
20.0-24.9 feet
#6
40.0-44.9 mph
25.0-29.9 feet
#7
45.0-49.9 mph
30.0-39.9 feet
#8
50.0-54.9 mph
40.0-49.9 feet
#9
55.0-59.9 mph
50.0-59.9 feet
#10
60.0-64.9 mph
60.0-69.9 feet
#11
65.0-69.9 mph
70.0-79.9 feet
#12
70.0-74.9 mph
80.0-89.9 feet
#13
75.0-79.9 mph
All Other Lengths
#14
80.0-84.9 mph
#15
85.0-89.9 mph
#16
All Other Speeds
Default Gap and Headway Tables (defaultx.gap & defaultx.hed)
Bin Number
Gap Bin time
Headway Bin Time
#1
00:00:03.00
00:00:03.00
#2
00:00:10.00
00:00:10.00
#3
00:00:15.00
00:00:15.00
#4
00:00:20.00
00:00:20.00
#5
00:00:30.00
00:00:30.00
#6
00:01:00.00
00:01:00.00
#7
00:02:00.00
00:02:00.00
#8
All Other Gaps
All Other Headways
To edit, change, or upload a different definition to the Phoenix II you will need to have a computer