Specifications

Cascade Modem Manual
Copyright © 2007 Diamond Traffic Products, Inc
Page 19
\Tn – DTE Rate
n=0 300 bps
N=1 600 bps
N=2 1200 bps
N=3 2400 bps
N=4 4800 bps
N=5 7200 bps
N=6 9600 bps
N=7 12.0 kbps
N=8 14.4 kbps
N=9 19.2 kbps
N=10 38.4 kbps
N=11 57.6 kbps
N=12 115.2 kbps
N=13 230.4 kbps
N=14 245.76 kbps
N=15 307.2 kbps
N=16 Autobaud on AT command*
\Vn – Connect Response
n=0 Issue Connect and Protocol Responses *
n=2 Issue Connect Response only
n=4 Issue Connect and Protocol Responses
with both transmit and receive data rates.
:I – Read Interrupts
Reports the lower 8 bits of User Register U70.
Reading the Interrupts clears them and resets
the /INT pin.
:M#### - Load Boot Command to EEPROM
beginning at address ####
:R – Read all User Registers
:Rnn – Read user Register nn
:Unn,xxxx – Write hex value xxxx to User Register
nn. To write to multiple User Registers in one
command line, address the first register in the
sequence. Subsequent values will be loaded into
successive registers. The :U command uses the
format AT:Unn, xxxx, yyyy, zzz, … <CR> to load
multiple registers.
+CGI=n – Country Configuration
0 = Japan
9 = Australia
A = Austria
F = Belgium
16 = Brazil
1B = Bulgaria
20 = Canada
26 = China
27 = Columbia
2E = Czech Republic
31 = Denmark
35 = Ecuador
3C = Finland
3D = France
42 = Germany
46 = Greece
50 = Hong Kong
51 = Hungary
53 = India
57 = Ireland
58 = Israel
59 = Italy
61 = South Korea
69 = Luxembourg
6C = Malaysia
73 = Mexico
7B = Netherlands
7E = New Zealand
82 = Norway
87 = Paraguay
89 = Philippines
8A = Poland
8B = Portugal
92 = Singapore
9F = South Africa
A0 = Spain
A5 = Sweden
A6 = Switzerland
B4 = United Kingdom
B5 = United States*
B8 = Russia
FE = Taiwan
+GCI? – Report Country Configuration