Specifications

32
3
EN
Playback
+− button
9 0 button
OK ` button
REC (s ) button
Playback
1 Select a file that has a segment
you would like to play back
repeatedly (☞ P.18 to P. 20).
2 In the File list display, press the +
or − button to select the file.
• In the File display, press the 9 or
0 button to select a file.
3 Press the OK ` button to start
playback.
4 Press the REC (s) button at the
point you want to start segment
repeat playback.
• [w] will flash on the display.
How to begin segment repeat
playback
This function enables repeated playback of
part of the file being played.
• Fast forwarding and rewinding can
be conducted when [w] is flashing in
the same manner as during normal
playback, and you can quickly
proceed as far as the end position
(☞ P. 28).
• Up to 16 index and temp marks can be
set in a  le. If you try to place more than
16 index or temp marks, [Index Full]
message will appear for index marks, and
[Temp Mark Full] for temp marks.
• Index or temp marks cannot be set or
erased in a locked  le (☞ P. 36 , P. 38 ).