User's Manual

CC Witness Page 13
Getting Started
AC Adapter Charging (optional): Using the AC Adapter,
connect the power plug to 120V AC power. Connect oppo-
site end (24-pin USB connector) to the bottom of the
CC Witness at the 24-Pin USB Connection
i.
Note: The 24-pin USB connector will only insert one way.
Do not force the plug “in”. While connected to the AC power
adapter, you will be able to play and use the CC Witness as
normal.
CCCC WWititnnessess
E
DIT
R
EC
M
ENU
P
LAY
S
PEED
B
ACK
AC ADAP TOR
Note: In some cases you will get better AM reception with
the AC Adapter disconnected.
Disconnect from Charging: You can stop charging at any
time. To remove the 24-pin USB Connector, push both but-
tons in at the same time, and then gently pull.
Computer Charging: Using the supplied USB cable, see
illustration on page 12, connect the 24-pin USB connector
end (with the buttons) to your CC Witness at the 24-Pin
USB Connection
i. Connect the opposite end (with the
regular USB plug) to your computer. When connected, the
screen will display “USB Connected”. While connected to a
Windows 2000 or XP computer, it is possible to play the
CC Witness, but you must de-activate the data transfer be-
tween the CC Witness and your computer. See page 29.
Charging using the
AC Adapter (optional)
CCrane_Manual_Ver2.4_CC Witness:Manual_CC Witness 11/19/09 6:12 PM Page 13