User's Manual

CC Witness Page 21
Display Screens and Functions
amount of time without sound before creating a
new track.
3. “Sound Settings”
a. “Play Equalizer” — The Play Equalizer has 8
settings: Normal (None), Jazz, Classic, Pop, Rock,
Live, Voice (Low Cut), and Filter-High. These set-
tings will change the sound of file in playback only.
These settings are also helpful for filtering out high-
pitched electronic noise or to improve voice on
playback of AM files.
b. “3D Effect On/Off” — When this setting is turned
“On”, the CC Witness will adjust file playback to
sound three-dimensional.
c. “Beep On/Off” — When this setting is turned “On”,
the CC Witness will make a beep sound with every
button press.
d. “Default Volume” — When the CC Witness is
powered-on, the volume will automatically lower
to the “Default Volume” setting. If the volume was
the internal memory (2 Gigabytes):
32Kbps = 140 hours
64Kbps = 70 hours
96Kbps = 52 hours
128Kbps = 35 hours
256Kbps = 17 hours
Note: Available recording time is calculated on the avail-
able free space where the file will be recorded.
b. “Mic/Line Choice” — Choose from 3 input
options for recording:
1. MIC (Mono)
2. MIC (Stereo)
3. LINE-IN (Stereo)
c. “Create Tracks” — This setting is used when
recording from a CD player, tape player, record
player, or other external source. When this setting
is activated, the CC Witness will detect the amount
of silent space between audio tracks. When the
set amount of time without sound expires, the
CC Witness will automatically create a new record-
ing track. When “Create Tracks” is activated, some
clipping of the first part of the next audio track may
occur (usually about a half second). To manually
create your own tracks press the UP Button
U W
while recording.
Use the slide bar to adjust and set the desired
CCrane_Manual_Ver2.4_CC Witness:Manual_CC Witness 11/19/09 6:15 PM Page 21