User's Manual

● Turn on the power, and select RM Radio from Mode menu.

● Auto Seek is a very useful function for listening to FM radio.

Press FF/REW button for a few seconds. Then the channel

will be automatically tuned in. The user can manually tune in

the channel by shortly pressing FF/REW buttons.

(When using Auto Seek function in an area with low signal

reception, the user needs to manually tune in the channel by

pressing FF/REW buttons. The user can set the environment

to listen to the radio – Mute, Mono, or Stereo function.)

● Saving Channels

Select the broadcasting channel to listen to by

pressing FF/REW buttons, and shortly press

SRS button. Then, the channel will be preset,

and “Channel 01” message will be displayed.

At this time, press FF/REW button and select

the channel number (1 ~ 20). Then, press

SRS button again to save the channel.

(The user can check the channels by pressing

SRS button for a few seconds in Frequency

mode. Then, Frequency mode will be

changed into Preset mode, and all channels

and frequencies will be displayed. By pressing FF/REW buttons, the user can search all

channels.)

● Recording

The user can record radio by simply pressing REC button while listening to FM radio.

The recorded file will be named ENC001 and saved under Encode folder in Record mode.

According to the recording order, the index will be saved.

* Notes

Noise might be included in recording in a place with low reception or when recording is made

indoors. When this happens, move to another place with better reception.

The earphone line functions as an antenna. We recommend users to unfold the line as long

as possible for best reception.

FM Radio Reception