User's Manual

■ USB Power Port
Allows operation and recharge of any appropriate USB powered device when connected.
(Supported 5Volt/700mA connection)
■ Listening to FM Radio
▶ Turn on the Radio by press button FM radio.
▶ Choose your Frequency by SCAN button (Left and Right).
▶ The frequency range is from 87.5 to 108Mhz and search it by 100Khz step.
▶ Press PRESET button and then LED will be turned ON. Press Left-Right key of SCAN button,
then you can find and listen to the Radio by your fixed-set frequency.
※ If press FM button during stand-by Bluetooth, the Radio will be ON and Bluetooth button’s
RED LED will be turned off.
※ During listening to the Radio, the Radio will be OFF if you get a phone call or pairing some
Bluetooth device to the lamp.
※ During pairing mode to listen to music, music playing will be stopped if turn on the FM Radio.
▶ Set PRESET
Turn on the radio by press FM button. FM button will be blinked by Red color if press left or right
key of SCAN button during 1.5sec Also, search frequency and set it automatically ( Maximum 20
channels available).
Red Led of Preset button will be ON after searching and setting then move to first set frequency.
(If there is no searching set frequency cause of bad reception, it will keep previous set frequency)
Press PRESET button again, LED will be turned off and cleared Preset mode.
Add frequency and delete : Press PRESET button during 1.5 sec after cleared PRESET mode,
User can add present frequency.
On PRESET mode, if press PRESET button during 1.5sec, delete frequency and then move set
frequency.(Red LED of PRESET button will be turned OFF after deleted all of set frequency)
■ How to use bluetooth
▶ Bluetooth On/Off
Pairing Bluetooth device to Lamp and then press Bluetooth button shortly then Bluetooth mode
will be OFF and RED LED will be turned off as well. If press it again shortly, Bluetooth mode will
be ON and RED LED will be turned on.