User's Manual

4) ID3 TAG: To set up the method to display the information of the song on LCD.
1. OFF: To display the information of the song only as file name format
2. ON: To display the information of the song as ID3 TAG information when the
song having tag information is played
5) SYNC: To set up recording method on external data input recording
1. SYNC OFF: To record all the songs, which are being inputted from external source
until pushing stop button from the start of external data input, as 1 file
2. 1 SYNC: To record only the first song being input from external source and then stop
3. SYNC ON: To record and automatically classify all the songs being input from external
source to each file
6) BITRATE
1. As it is the function to control bit rate of recorded file for each use If you set the bit
rate low, recording time increases, but sound quality is down, and If you set the bit rate
high, recording time decreases, but sound quality is up. The set up in audio mode is 5
steps in range of 64Kbps ~ 224Kbps.
7) BACKLIT (BACK LIGHT): To set up back light on/off duration
1. OFF: Back light off even during key operation
2. 1 Sec: 1 SEC of Back light on during key operation
3. 2 Sec: 2 SEC of Back light on during key operation
4. 3 Sec: 3 SEC of Back light on during key operation
5. 4 Sec: 4 SEC of Back light on during key operation
6. 5 Sec: 5 SEC of Back light on during key operation
8) LCD CONT. (LCD CONTRAST)
1. As it is the function to control contrast of icon, control by 1 step in range of 01 ~ 20
is possible. (It is set to 10 steps on ex-factory)
9) LED CTL (LED CONTROL): ON/OFF of LED (flashing light in various colors) in
play or record mode
1. OFF: LED OFF
2. ON: LED ON
10) ERASE: To erase files stored in memory
1. ERS ONE: To erase only 1 song shown on LCD before menu display
2. ERS ALL: To erase all the files of selected mode
11) FORMAT: To format the memory stored in the set
1. FORMAT: To reset memory fast
2. LOW FORMAT: To format memory while checking memory block for a longer
time