User's Manual

* Having AUTO SEEK function, it is easy to control the device.
After selecting radio, if you push FF KEY or REW KEY for about 1 second, it stops at
receivable channel.
When you use AUTO SEEK function, correct tuning may not be done, when you use
fine tuning with REW or FF KEY.
● Radio tuning method
① By pushing mode button, select radio mode.
② LCD displays frequency. Select wanted frequency with FF/REW KEY.
● Channel storing method
① By pushing mode button, select radio mode.
② LCD displays frequency. Select wanted frequency with FF/REW KEY.
③ If you push play/pause button, channel 01 shown on frequency is out, when select
wanted channel (01-10) with FF/REW KEY and push play button, selected channel is
stored to channel 01 and frequency is displayed.
You can store up to CH10 with the same manner.
☞ Checking stored channel
If you push menu button in frequency mode, it changes to preset mode, and channel
and frequency that are stored are displayed, when you select the stored channel with
FF/REW KEY. If you push menu button again in frequency mode, it changes to preset
mode and you can select frequency.
● How to record radio broadcast
Select the wanted channel with the same manner of ①~② of radio channel set up
method.
Record it by pushing REC button. The message recorded at this time is stored to
the next of the latest file recorded in audio mode.
You can not check the data of the file being recorded, but after stop in audio
mode.
FM radio receiving function