User's Manual

3. Charging the Battery

3-1, AC ADAPTOR

Fully charge the battery before starting to use your device for the first time.

1. Plug the converter to the AC adapter.

2. Connect the DC end of the AC adapter to the bottom of your device.

3. Plug the other end of the AC adapter into a wall outlet.

RED LED The device is charging in the progress.

GREEN LED The device is charged fully.

BLINKED LED The device is not charged battery in the battery off switch.

The charge indicator glows red when charging is in progress. Do not disconnect your device from

AC power until the battery is fully charged, as indicated by the red indicator turning into green.

This will take a couple of hours

Note

1. When you connect the AC adapter to charge the battery after the battery power has been fully

drained, wait for at least one minute before turning on the device.

Depending on your region of purchase, the converter may not look exactly the same as the picture

shown.

2. Check the specification of AC Adaptor as to whether it is described as AC 100-230V/DC 5V 2A

when you purchase it.