User's Manual

12
Remove USB Hard Drive from USB Port
1. First, close file or folder being used.
2. Please draw the file named "Untitled" into "Recycle Bin".
3. You can then remove USB Hard Drive from the USB Port.
- Caution
Mac 9.0 OS does not support "FAT Format" that Windows OS
supports. If users want to use this device in Mac 9.0 OS, please
format it in Mac OS and you can use it then.
Users cannot use it in both OS of Mac 9.0 and Windows 98
(or Above) at same time.
When Red Light of LED Indicator is blinking, please do not
remove USB Hard Drive from USB Port. It will cause to loss,
break data or damage FAT table.
If the above happened and error message was found, please
format(Quick format) it again. Then you can use it.
Q. How to use USB Hard Drive if no "Installation CD"?
A. You can download the necessary drivers from www.diasonic.com.
Q. Which Operating System can support USB Hard Drive?
A. You can use USB Hard Drive at Windows 98, Windows 98 SE,
Windows ME, Windows 2000, Windows XP and Mac 9.0 (or Higher).
Please refer "Page 4. What is USB Hard Drive?"
Q. If Computer cannot discover USB Hard Drive?
A. Please click "Start"-->"Set Up"-->"Control Panel"-->"System" and
check whether there is Universal Serial Bus controller or not.
FAQ