500-027P040615
LCD Color TV/Monitor Owner's Manual Model : LT-15KLF/LT-17FLF/LT-20FLF
Warnings WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING : To reduce the risk of electric shock do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Warnings Service Never remove the back cover of the TV, this can expose you to high voltage and other hazards. If the TV does not operate properly, unplug it and call your dealer. Connect the antenna cable to the connection marked Ant. (on the rear). For best reception, use an outdoor antenna. Location Position your TV so that no bright light or sunlight will shine directly on the screen. Do not expose the TV to vibration, moisture, dust or heat.
Contents Before operating the set, please read this manual carefully. Warnings Contents Supplied Accessories Controls Controller of panel Remote controller Basic Operation Turning the TV On and Off Programme selection Volume adjustment Q.
Supplied Accessories L Make Sure the following accessories are provided with Product. 1. AC/DC adaptor 2. AC Cord 3. Remote controller 4. Batteries (type AAA) MENU TV/AV SLEEP Q.VIEW I/II LIST PC/ * ARC/ * TEXT SIZE HOLD INDEX UPDATE TIME REVEAL MIX PSM SSM 6. PC IN cable 5. Owner’s manual LCD Color TV/Monitor Owner's Manual Model : LT-15KLF/LT-17FLF/LT-20FLF 7.
Controls 1. ON/OFF Switches TV set on or off.. 2. MENU Displays a menu. 3. + PR - (Programme Up/Down) 4. + VOL - (Volume Up/Down) Adjusts the volume./ Adjusts menu settings. 5. TV/AV Selects TV, SCART, VIDEO, S-VIDEO, RADIO(Only when the set is Radio On.) or PC mode. / Clears the menu from the screen. 6. Power Indicator Illuminates in red when the TV is in standby mode./ Illuminates in green when the TV is switched on. Illuminates in amber and blinks when the power save mode (only PC mode). 7.
Controls All the functions can be controlled with the remote controller. Some functions can also be adjusted with the buttons on the side panel of the set. Remote controller Before you use the remote controller, please install the batteries. 1. POWER Turns the TV on from standby or off to standby mode. 2. MUTE 1 2 Turns the sound on and off. 3. NUMBER buttons Selects programme numbers. 4. TV/AV Selects TV, SCART, VIDEO, S-VIDEO, RADIO(Only when the set is Radio On.) or PC mode.
Controls 12. VOLÏq (Volume Up/Down) Adjusts the sound level. Adjusts menu settings. 13. PC/* Selects the PC mode. 14. PSM (Picture Status Memory) Recalls your preferred picture setting 15. SSM (Sound Status Memory) Recalls your preferred sound setting TV/AV MENU 16. ARC/* (*LT-17FLF MODEL) You can watch TV in various picture formats; 16:9, 14:9, 4:3, Auto, 16:9 Zoom, 14:9 Zoom, 4:3 Zoom. Repeatedly press the ARC/* button to select your desired picture format. Note.
Basic Operation Turning the TV On and Off Standby Setup: The AC-DC adapter and the AC power cord must be set up and connected to have the TV in standby mode ready to be turned on. Press the ON/OFF button on the side or front panel of the TV to go into standby mode. 1. If the TV is in standby mode, press the POWER button on the remote controller or the TV itself to turn the TV on. 2. Press the Power button again on the remote controller or the ON/OFF button the TV itself to turn the TV off.
On Screen Menus and Displays Equalizer 1. Press the MENU button to display main menu. 2. Press the PRxy button to select menus-Picture, Sound, Special, Setup. 3. Adjust each menu with the VOLÏq button. 4. Press the MENU button to return to preceding menu. 5. Press the TV/AV button to finish adjusting menu. Ș Ș Ș Ș Picture Sound Special Setup Position : ƇƉ Next : ȖȘ Exit : TV/AV Contrast Brightness Colour Sharpness Position : ƇƉ Back : MENU 0.1 0.5 1.5 5.
Setting up TV Programme Once you have preset the programmes, you will be able to use the PRxy or NUMBER buttons to scan the programmes you programmed. Programmes can be tuned using automatic or manual modes. Auto Programme System Start BG Auto Programme All programmes that can be received are stored by this method. It is recommended that you use Auto programme during installation of this set. 1. Press the MENU button. 2. Select the Setup menu. 3. Select the Auto Programme menu. 4.
Setting up TV Programme Manual Programme Manual Programme Manual Programme lets you manually tune and arrange Programme the programmes in whatever order you desire. Also you Channel Table can assign a programme name with 5 characters to each System programme number. Search Memorize 1. Press the MENU button. Name 2. Select the Setup menu. Position : ƇƉ 3. Select Manual Programme menu. Back :MENU 4. Select a programme with the VOLÏq button or number buttons. 5. Press the PRxy button to select Channel menu.
Setting up TV Programme Programme Edit Programme Edit This function enables you to delete or skip the stored P00 ----- P05 ----P01 ----- P06 ----programmes. P02 ----- P07 ----Also you can move some programmes to other P03 ----- P08 ----P04 ----- P09 ----programme numbers or insert a blank programme data ƅDelete ƅName into the selected programme number. ƅMove ƅSkip 1. Press the MENU button. ƇƉ ȖȘ Position : 2. Select the Setup menu. Back : MENU Exit : TV/AV 3.
Picture Control You can adjust picture Contrast, Brightness, Colour, Sharpness and Tint(only in NTSC mode) to the levels you prefer. Picture Manual Picture Control 1. Press the MENU button. 2. Select the Picture menu. 3. Press the PRxy button select a picture item. 4. Press the VOLÏq button to adjust the picture condition as you want. 5. Press the TV/AV button to store for the picture User.
Sound Control You can select your preferred sound setting; Flat, Music, Movie or Speech. You can also adjust the sound frequency of equalizer, balance. If you switch AVL to on, the set automatically keeps on an equal volume level even if you change programmes. 1. Press the MENU button. 2. Select the Sound menu. 3. Press the PRxy button to select the desired sound item; Equalizer, Balance, AVL, Surround or Sound Mode. 4. Press the VOLÏq button to make desired adjustment. 5.
Sound Control Auto Sound Control * The sound Flat, Music, Movie and Speech are programmed for good sound reproduction at the factory and cannot be changed. SSM (Sound Status Memory) 1. Press the SSM button. 2. Press the SSM button repeatedly to select. Each press of the button changes the screen display as below. Flat ؋ Music ؋ Movie ؋ Speech ؋ User TV/AV MENU SLEEP Q.VIEW I/II • Choose Flat for the standard factory settings. • Choose Music when watching music video or concerts.
Other functions You can control other functions; Clock, Blue Back, Auto Sleep, Childlock, Radio and ARC(*Only LT-17FLF MODEL) menu. Clock Setting the clock is necessary in order to use the various timer features of the TV. You can set automatic TV On or Off time. Special Ș Off Off Off Off 16:9 Clock Blue Back Auto Sleep Childlock Radio ARC* Next : ȖȘ Exit : TV/AV Position : ƇƉ Back : MENU 1. Press the MENU button. 2. Press the PRxy button to select the Special menu. Then press the VOLÏq button. 3.
Other functions Auto Sleep If you select Auto Sleep On the set will automatically switch itself to standby mode approximately ten minutes after a TV Channel stops broadcasting. 1. Press the MENU button. 2. Select the Special menu. 3. Press the PRxy button to select Auto Sleep. 4. Press the VOLÏq button to select On. 5. Press the TV/AV button to return to normal TV viewing. Note.
Radio Control This function is possible only when the set is in Radio mode.(Radio mode is displayed when the Setting for special menu is radio On.) Radio Setup Mode Auto 1. Use TV/AV button on remote controller to select Frequency 87.50 MHz Programme 1 Radio mode. 5MUWZQbM 2. Press the MENU button to set Radio Setup menu. Delete Auto Programme Ș 3. Press the VOLÏq button repeatedly to select 7NN
TELETEXT TEXT On/Off 1. Press TEXT button once, displays the Teletext pages. If you press the TEXT button twice, the teletext pages and the TV picture are concurrently displayed on both sides of the screen. 2. Press MIX button once more, displays the Teletext pages superimposed on the TV picture. 3. Press the TEXT button to switch off Teletext once more, Text mode is off, and TV mode appears. TOP text The user guide displays four fields-red, green, yellow and blue at the bottom of the screen.
TELETEXT Special TELETEXT functions MENU TEXT Changes Teletext mode SIZE Selects double height text. Press this button to enlarge the top half of the page. Press this button again to enlarge the bottom half of the page. Press this button again to return to the normal display. HOLD Stops the automatic page change, which will occur if a Teletext page consists of 2 or more sub pages. The number of sub pages and the sub page displayed is, usually, shown on the screen below the time.
External Equipment Connection You can connect additional equipment, such as VCRs, camcorders etc. to your set. Examples are shown below. Antenna connection 1. Connect RF out on the VCR to the Antenna input on the rear of the TV. 2. Connect the antenna cable to the antenna in jack on the VCR. 3. Press the TV/AV button to select Antenna Input source. 4. Press the PLAY button on the VCR. VCR VCR (*LT-15KLF/17FLF MODEL) (*LT-20FLF MODEL) SCART jack 1.
External Equipment Connection A/V OUT(*Only LT-20FLF MODEL) 1. Connect the Audio outputs(L, R) of the TV to Audio-IN(L, R) of another displayer or the amplifier system - If you connect the amplifier system, you can also play the TV sound through the stereo amplifier system. 2. Connect the Video output of the TV to Video IN of another displayer. S-VIDEO INPUT If using an S-VIDEO source, the picture quality will be improved over a video source. 1.
Connecting the PC as a monitor This function is possible only when the set is in PC mode. Use the TV/AV button on remote controller. Picture adjustment You can adjust picture Contrast, Brightness, Temperature, Clock, Phase and ARC(*Only LT-17FLF MODEL) as you prefer. 1. Press the TV/AV button to select the PC mode. 2. Press the MENU button. 3. Select the Picture. 4. Press the PRxy button to select the desired picture item. 5. Press the VOLÏq button to make appropriate adjustments. 6.
Connecting the PC as a monitor Sound adjustment Sound 1. Press the MENU button. Equalizer 2. Select the Sound menu. Balance 3. Press the PRxy button to select the desired AVL Surround sound item; Equalizer, Balance, AVL, Surround or Sound Mode Sound Mode. Input 4. Press the VOLÏq button to make desired adjustment. 5. Press the VOLÏq button in Equalizer to set the Position : ƇƉ Back : MENU Equalizer. 6. Press the PRxy button to select your preferred setting ; Flat, Music, Movie, Speech or User.
Connecting the PC as a monitor Position Adjustment This function is to adjust picture to left/right and up/down as you prefer. 1. Press the MENU button. 2. Select the H/V Position menu. 3. Press the PRxy button to select the desired position item. 4. Press the VOLÏq button to adjust horizontal position and vertical position. 5.
Connecting the PC as a monitor PC/DTV INPUT(*LT-15KLF/17FLF MODEL) 1. Connect the PC IN cable (D-sub jack) from the monitor output socket of the PC to the PC/DTV input socket of the set. 2. Connect the PC Audio IN cable from the PC to the PC AUDIO IN of the set. 3. Press the TV/AV or PC button to select PC mode. 4. Switch on the PC, and the PC screen appears on the set. The set can be operated as the PC monitor. PC/DTV INPUT (*LT-20FLF MODEL) 1.
Product Specification Model Main body (With stand) LT-15KLF LT-17FLF Horizontal size 390 mm 520(520) mm 575 mm Thickness 60 mm 60(180) mm 60(160) mm Height 350 mm 320(365) mm 395(450) mm 4.85(6.2) kg 7.85(9.11) kg Weight 4 kg LT-20FLF Television system PAL-BG, I, DK, / SECAM-BG, DK, L / AV NTSC Television programme VHF: 2~12 UHF :21~69 Cable : S1~S41 LCD Panel 15" TFT LCD panel 17.
Troubleshooting Problem Check item No picture on screen and no sound from speakers • Insert the AC power cord plug securely in AC power outlet. • Make sure the remote control is not in the standby mode (The POWER/Standby indicator is red.) No picture/No picture from AV terminal • Check the brightness setting of the display. • Lamp may have malfunction. • Make sure a cable with no VIDEO input signal is connected to the S-VIDEO INPUT terminal. Picture is displayed, but no sound from the speakers.
Limited Warranty 31 22
