TFT / LCD TV LT-26HLFH/32HLFH ENGLISH Instruction Manual
Warnings WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING : The unit is operated at dangerous voltages. The unit may only be opened by an authorised specialist. All maintenance and servicing work must be carried out by an authorised company. Repairs that are carried out incorrectly could result in fatal injuries to the user.
Warnings Never remove the back cover of the TV, this can expose you to high voltage and other hazards. If the TV does not operate properly, unplug it and call your dealer. Connect the antenna cable to the connection marked Ant. (on the rear). For best reception, use an outdoor antenna. Location Position your TV so that no bright light or sunlight will shine directly on the screen. Do not expose the TV to vibration, moisture, dust or heat.
Contents Before operating the set, please read this manual carefully. Warnings Contents Supplied Accessories Installation Controls Controller of panel Remote controller Basic Operation Turning the TV On and Off Programme selection Volume adjustment Q.
Supplied Accessories L Make Sure the following accessories are provided with Product. 2. AC Cord 3. Remote controller 4. Batteries (type AAA) 5. Instruction manual 6. VGA cable ENGLISH 1. AC/DC adaptor(LT-26HLFH) Owner’s Manual 26" /32" WIDE LCD TV/MONITOR Model:LT-26HLFH/32HLFH 7.
Installation Installation Options * You can install the TV on a wall or place it on a table-like surface. * To eliminate any risk of injury from the TV falling, it should be mounted securely. 1. Wall Installation Caution: Do not install the TV on a weak wall surface, like plaster etc. When the TV is placed into a cupboard the distance between the TV and the wall have to leave minimum 60mm square as below. When the TV is mounted on the wall.
1. ON/OFF Switches TV set on or off. 2. MENU Displays a menu. 3. + PR - (Programme Up/Down) Selects a programme or a menu item. 4. + VOL - (Volume Up/Down) Adjusts the volume./ Adjusts menu settings. 5. TV/AV Selects TV, SCART1,SCART2, S-VIDEO, RADIO(Only when the set is Radio On.), COMPONENT, PC ANALOG, HDMI mode. / Clears the menu from the screen. 6. Power Indicator Illuminates in red when the TV is in standby mode./ Illuminates in green when the TV is switched on. 7.
Controls All the functions can be controlled with the remote controller. Some functions can also be adjusted with the buttons on the side panel of the set. Remote controller Before you use the remote controller, please install the batteries. 1. POWER Turns the TV on from standby or off to standby mode. 2. MUTE Turns the sound on and off. 3. NUMBER buttons Selects programme numbers. 4. TV/AV Selects TV, SCART1,SCART2, S-VIDEO, RADIO(Only when the set is Radio On.), COMPONENT, PC ANALOG, HDMI mode.
Controls 14. PICTURE( ) Recalls your preferred picture setting 15. SOUND( ) Recalls your preferred sound setting ) ENGLISH 16. ARC( You can watch TV in various picture formats; Auto, 16:9, 14:9, 4:3, 16:9 Zoom, 14:9 Zoom, 4:3 Zoom. Repeatedly press the ARC button to select your desired picture format. Note. 16:9 and 4:3 in PC mode are available. 17. TELETEXT buttons These buttons are used for Teletext. For further details, see the ‘Teletext’ section. 18.
Basic Operation Turning the TV On and Off Standby Setup: The AC-DC adapter and the AC power cord must be set up and connected to have the TV in standby mode ready to be turned on. Press the ON/OFF button on the side panel of the TV to go into standby mode. 1. If the TV is in standby mode, press the POWER button on the remote controller or the TV itself to turn the TV on. 2. Press the Power button again on the remote controller or the ON/OFF button the TV itself to turn the TV off.
On Screen Menus and Displays Picture Sound Special Setup Position :▲▼ q q q q Next :◀▶ Exit : TV/AV Contrast Brightness Colour Sharpness Position :▲▼ Back : MENU Flat Music Movie Speech User 0.1 0.5 1.5 5.
Setting up TV Programme Once you have preset the programmes, you will be able to use the PRx/PRy or NUMBER buttons to scan the programmes you programmed. Programmes can be tuned using automatic or manual modes. Auto Programme System Start BG Auto Programme All programmes that can be received are stored by this method. It is recommended that you use Auto programme during installation of this set. 1. Press the MENU button. 2. Select the Setup menu. 3. Press the Ïq button to select the Setup menu. 4.
Setting up TV Programme Manual Programme Manual Programme lets you manually tune and arrange Programme the programmes in whatever order you desire. Also you Channel can assign a programme name with 5 characters to each Table System programme number. Search Memorize 1. Press the MENU button. Name 2. Select the Setup menu. Position :▲▼ Back : MENU 3. Select Manual Programme menu. 4. Select a programme with the Ïq button or number buttons. 5. Press the PRx/PRy button to select Channel menu. 6.
Setting up TV Programme Programme Edit Programme Edit This function enables you to delete or skip the stored P00----P05----P01----P06----programmes. P02----P07----Also you can move some programmes to other P03----P08----programme numbers or insert a blank programme data into P04----P09----■Delete ■Name the selected programme number. ■Move ■Skip 1. Press the MENU button. Position :▲▼◀▶ 2. Select the Setup menu. Back : MENU Exit : TV/AV 3. Press the Ïq button to select the Setup menu. 4.
Picture Control You can adjust picture Contrast, Brightness, Colour, Sharpness and Tint(only in NTSC mode) to the levels you prefer. 1. Press the MENU button. 2. Select the Picture menu. 3. Press the PRx/PRy button select a picture item. 4. Press the Ïq button to adjust the picture condition as you want. 5. Press the TV/AV button to store for the picture User.
Sound Control You can select your preferred sound setting; Flat, Music, Movie or Speech. You can also adjust the sound frequency of equalizer, balance. If you switch AVL to on, the set automatically keeps on an equal volume level even if you change programmes. 1. Press the MENU button. 2. Select the Sound menu. 3. Press the Ïq button to select the Sound menu. 4. Press the PRx/PRy button to select the desired sound item; Equalizer, Balance, AVL, Surround or Sound Mode. 5.
Sound Control SOUND Effect ENGLISH 1. Press the SOUND( )button. 2. Press the SOUND( ) button repeatedly to select. Each press of the button changes the screen display as below. Flat → Music → Movie → Speech → User • Choose Flat for the standard factory settings. • Choose Music when watching music video or concerts. • Choose Movie when watching movies. • Choose Speech when watching a show that is mostly dialogue. • Choose User to recall your personalized settings.
Other functions You can control other functions; Clock, Blue Back, Auto Sleep, Childlock, Radio and ARC menu. Special Clock Setting the clock is necessary in order to use the various timer features of the TV. You can set automatic TV On or Off time. Clock Blue Back Auto Sleep Childlock Radio ARC Position :▲▼ Back : MENU ▶ Off Off Off Off 16:9 Next :◀▶ Exit : TV/AV 1. Press the MENU button. 2. Press the PRx/PRy button to select the Special menu. Then press the Ïq button. 3.
Other functions Auto Sleep If you select Auto Sleep On the set will automatically switch itself to standby mode approximately ten minutes after a TV Channel stops broadcasting. 1. Press the MENU button. 2. Select the Special menu. 3. Press the Ïq button to select the Special menu. 4. Press the PRx/PRy button to select Auto Sleep. 5. Press the Ïq button to select On. 6. Press the TV/AV button to return to normal TV viewing. Note.
Radio Control This function is possible only when the set is in Radio mode.(Radio mode is displayed when the Setting for special menu is radio On.) Radio Setup 1. Use TV/AV button on remote controller to select Mode Auto Frequency 87.50 MHz Radio mode. Programme 1 Memorize 2. Press the MENU button to set Radio Setup menu. Delete Auto Programme ▶ 3. Press the Ïq button repeatedly to select Off Time Off Edit Name ▶ Mode Auto or Manual.
Other functions PIP function PIP will let you view two separate source inputs on your TV screen at the same time. ENGLISH Viewing the PIP picture Press the PIP( ) button. (Press the PIP button again, to turn PIP off.) Selecting the PIP picture mode Press the MODE( ) button to adjust the PIP picture mode. Each press the MODE( ) button, selects the 16:1, 9:1 and 3:1 mode. Moving the PIP picture Press the POSITION( ) button to adjust the position of sub picture in PIP mode.
TELETEXT TEXT On/Off Press the TEXT button to switch to TELETEXT. The initial page or last selected page appears on the screen. The first page number indicates your selection, while the second shows the current page displayed. 1. Press TEXT button once, displays the Teletext pages. 2. Press MIX button once more, displays the Teletext pages superimposed on the TV picture. 3. Press the TEXT button to switch off Teletext once more, Text mode is off, and TV mode appears.
TELETEXT Functions TEXT Changes Teletext mode. SIZE Selects double height text. Press this button to enlarge the top half of the page. Press this button again to enlarge the bottom half of the page. Press this button again to return to the normal display. HOLD Stops the automatic page change, which will occur if a Teletext page consists of 2 or more sub pages. The number of sub pages and the sub page displayed is, usually, shown on the screen below the time.
External Equipment Connection You can connect additional equipment, such as VCRs, camcorders etc. to your set. Examples are shown below. Antenna connection 1. Connect RF out on the VCR to the Antenna input on the rear of the TV. 2. Connect the antenna cable to the antenna in jack on the VCR. VCR SCART 2 1. Connect the AV out jacks on the AV device to the SCART2 jack on the TV. 2. Use the TV/AV button to select SCART2 mode. 3. Press the PLAY button on the DVD. DVD SCART 1 1.
External Equipment Connection If using an S-VIDEO source, the picture quality will be improved over a video source. 1. Connect the S-VIDEO output of a VCR to the S-VIDEO input on the TV. 2. Connect the audio cables from the S-VIDEO on the VCR to the L (MONO), R inputs on the TV. 3. Select S-VIDEO mode by pressing the TV/AV button repeatedly. 4. Press the PLAY button on the VCR. The VCR playback picture appears on the screen.
Connecting the PC(HDMI/VGA) as a monitor This function is possible only when the set is in PC mode. Use the TV/AV button on remote controller. Picture adjustment You can adjust picture Contrast, Brightness, Temperature, Clock, Phase and ARC as you prefer. 1. Press the TV/AV button to select the PC mode. 2. Press the MENU button. 3. Select the Picture. 4. Press the PRx/PRy button to select the desired picture item. 5. Press the Ïq button to make appropriate adjustments. 6.
Connecting the PC(HDMI/VGA) as a monitor 1. Press the MENU button. Sound 2. Select the Sound menu. Equalizer q 3. Press the PRx/PRy button to select the desired Balance 0 AVL Off sound item; Equalizer, Balance, AVL, Surround, Surround Off Sound Mode, Input. Sound Mode L+R Input PC 4. Press the Ïq button to make desired adjustment. 5. Press the Ïq button in Equalizer to set the Position :▲▼ Next :◀▶ Back : MENU Exit : TV/AV Equalizer. 6.
Connecting the PC(HDMI/VGA) as a monitor Position Adjustment This function is to adjust picture to left/right and up/down as you prefer. 1. Press the MENU button. 2. Select the H/V Position menu. 3. Press the PRx/PRy button to select the desired position item. 4. Press the Ïq button to adjust horizontal position and vertical position. 5.
Connecting the PC(VGA) as a monitor 1. Connect the PC IN cable (D sub jack) from the monitor output socket of the PC to the PC/DTV input socket of the set. 2. Connect the PC AUDIO IN cable from the PC to the PC AUDIO IN of the set. 3. Press the TV/AV or TV/PC button to select PC ANALOG mode. 4. Switch on the PC, and the PC screen appears on the set. The set can be operated as the PC monitor. Resolution Mode XGA Horizontal Best resolution frequency(KHz) 1024 x 768 48.4 KHz 1024 x 768 56.
Product Specification Model LT-26HLFH LT-32HLFH Horizontal size 768(768)mm Horizontal size Thickness 102(215)mm Thickness 112(230)mm Height 442(497.5)mm Height 503(560)mm Weight 17.6(19.3)kg 933mm Main body Weight Power requirements Television system Television programme LCD Panel Power consumption 12.81(14.56) kg DC 24V/6.
