Instruction manual

ENGLISH
Connecting the PC(VGA) as a monitor
Note:
a. If the set is cold, there may be a small “flicker” when the set is switched on.
This is normal, there is nothing wrong with the set.
b. Some dot defects may appear on the screen, like Red, Green or Blue spots.
However, this will have no impact or effect on the monitor performance.
c. The resolution which is not supported will appear at the resolution which gets near
to the resolution which is supported
* The standard of the resolution which gets near : H/V sync.
d. Press the PÏP button to switch the 640x480 to 720x480P 60Hz.
2229
PC INPUT
1. Connect the PC IN cable (D sub jack) from the monitor output socket of the PC
to the PC/DTV input socket of the set.
2. Connect the PC AUDIO IN cable from the PC to the PC AUDIO IN of the set.
3. Press the TV/AV or TV/PC button to select PC ANALOG mode.
4. Switch on the PC, and the PC screen appears on the set.
The set can be operated
as the PC monitor.
Resolution
1024 x 768 48.4 KHz 60 Hz
1024 x 768 56.5 KHz 70 Hz
1024 x 768 60.0 KHz 75 Hz
XGA
Mode Best resolution
Horizontal
frequency(KHz)
Vertical
frequency(Hz)