Manual

31
Problem Solution
Radio/NAV display only shows DISC
and track number and there is no iPod
control.
Make sure DIP switch settings are correctly set for text display (refer to page
8 for DIP switch settings).
Make sure all EQ and BASS boost options are turned off on your iPod.
Adjustments to the gain setting may be required (refer to page 19).
Radio/steering wheel controls do not
operate iPod.
Music is distorted or sound level is too
low with iPod connected.
Troubleshooting
No audio from iPod source.
Reset the iPod. Verify proper connection to iPod/interface. Check for
compatibility. Older iPod models don’t support USB audio.
Reset iPod and make sure most recent iPod rmware is installed.
No text display on radio.
Make sure DIP switch settings are correctly set for text display (refer to page
8 for DIP switch settings).