User guide
26
Bluetooth & MAT (Music Announcer Technology) conguration
To alter voice announcement and Bluetooth pairing settings select Bluetooth as your audio source, press the DISC button
that corresponds to the feature you want to congure, and then use Track to browse through conguration options:
• DISC 1, 2 or 3 should be selected if you want to control Bluetooth audio streaming playback.
• DISC 4 controls the Autoconnect feature. Available options are Enable and Disable. This controls whether or not the
MediaBridge will reconnect automatically when phone becomes disconnected. Only the most recently paired device will
be reconnected automatically.
• DISC 5 controls the paired devices memory. There is only one option. Change tracks to clear the listing of paired
devices with the MediaBridge and put module into discoverable mode.
• DISC 6 controls MAT setting. Available options are Default, Extended, Phone only, and Off (refer to the chart below).
Options
Default
Extended
Phone only
Off
Function
Reset MAT back to factory default configuration
Turn on ALL MAT feature
Turn on the phone relative MAT only
Turn off MAT completely