User guide

34
Problem Solution
Radio/NAV display only shows DISC
and track number and there is no iPod
control.
Make sure DIP switch settings are correctly set for text display (refer to page
8 for DIP switch settings).
Make sure all EQ and BASS boost options are turned off on your iPod.
Adjustments to the gain setting may be required (refer to page 19).
Music is distorted or sound level is too
low with iPod connected.
Troubleshooting
No audio from iPod source.
Reset the iPod. Verify proper connection to iPod/interface. Check for
compatibility. Older iPod models don’t support USB audio and may only
operate in Locked mode.
No text display on radio.
Make sure the module is reconnected with the vehicle off when changing any
dip switches. Verify that the vehicle’s radio is capable of displaying CD-text.
Some early model year radios don’t support text display.
Correct DIP switch settings but still no
text display.
Make sure DIP switch settings are correctly set for text display (refer to page
8 for DIP switch settings). Please also select proper display mode (refer to
page 19, DISC 5).
iPod does NOT charge.
Check all connections. See if iPod charges while connected to computer or
wall charger. You may need to reset the iPod.