Manual

33
Problem Solution
Text is not displaying in selected
emulation.
Identify your audio system rst and set switches accordingly on MediaBridge
module. Use the DISP button on radio/display to toggle text elds. CD
emulation has no text display.
Why is the interface not controlling the
iPod/USB drive?
Troubleshooting
Please make sure that the USB connection is not loose. Make sure that
an iPod case is not preventing the dock connector from being fully seated.
Disconnect and reconnect the device. If iPod is not responding please try
resetting it. USB device must also be FAT16/32 format and contain supported
MP3, WMA or AAC content.
iPod does not charge.
Make sure all EQ and BASS boost options are turned off on your iPod.
Music is distorted or sound level is too
low with iPod connected.
Check all connections. See if iPod charges while connected to computer or
wall charger. You may need to reset the iPod.
Sirius tuner can’t be selected.
Unit must be in SAT emulation. Check for proper connection to the mini DIN
8 receptacle.
What size of USB ash drive should I
use?
Large capacities are supported, however up to 4GB is recommended for
optimal user experience.