User's Manual
Table Of Contents
- 1 Manufacturer´s Certification
- 2 Supplier’s Declaration of Conformity
- 3 Introduction
- 4 Basic settings
- 5 Setting Up the Device
- 6 Overview
- 7 Projected Capacitive Touch Screen
- 8 Planning the Installation
- 9 Installation to a stand
- 10 Connector Panel
- 11 Storage Media
- 12 Installing System to a Wall
- 13 Mounting a Second Display (A1150/D1101)
- 14 Peripherals (optional)
- 15 Starting Up the System
- 16 Error Reporting
- 17 POST Code
- 18 Technical Data
- 19 Appendix
Planning the Installation
8.4
8.4 Installation site requirements
8.4.1
8.4.1 Desktop version
When selecting the installation site, ensure that:
• The area is flat leveled.
• The system to be installed on a table surface and not on a floor.
8.4.2
8.4.2 Wall mount version
• To reduce the risk that someone may accidentally walk into the system, location such as walkway ar-
eas, hallways areas or crowded areas are not recommended.
• Make sure that all applicable building and electric codes and accessibility requirements are followed.
• The mounting area must have adequate viewing area and ventilation, as well as access to an AC
power outlet.
• The mounting method must be able to support the combined weight of the system and the sus-
pended weight of all cables attached to the system.
• The system must be mounted to a solid concrete or brick wall with flat smooth surface.
Copyright © 2020, Diebold Nixdorf
01750342843B
8-5