User's Manual
Table Of Contents
- 1 Manufacturer´s Certification
- 2 Supplier’s Declaration of Conformity
- 3 Introduction
- 4 Basic settings
- 5 Setting Up the Device
- 6 Overview
- 7 Projected Capacitive Touch Screen
- 8 Planning the Installation
- 9 Installation to a stand
- 10 Connector Panel
- 11 Storage Media
- 12 Installing System to a Wall
- 13 Mounting a Second Display (A1150/D1101)
- 14 Peripherals (optional)
- 15 Starting Up the System
- 16 Error Reporting
- 17 POST Code
- 18 Technical Data
- 19 Appendix
10
10 Connector Panel
The following sockets are located under the cable connection cover of the display:
Port label Description of port
1
LAN RJ45 LAN port
2
USB2 USB 3.0 (Type C with DP and PD 5/12V)
3
COM1 RJ50 powered COM port (5V/12V)
4
COM2 RJ50 powered COM port (5V/12V)
5
USB3/4 USB 2.0 (Type A)
6
USB5/6 USB 3.0 (Type A)
7
24V IN Connection to power (24V DC Input)
8
USB1 USB 3.0 (Type C with DP and PD 5/24V)
Power source/sink function
9
CASH RJ12 (Cash drawer)
WARNING
Make sure that all additional devices have a CE certificate.
NOTE
Maximum 70W load is allowed for any combination of the interface connectors.
Copyright © 2020, Diebold Nixdorf
01750342843B
10-1