User's Manual
Table Of Contents
- 1 Manufacturer´s Certification
- 2 Supplier’s Declaration of Conformity
- 3 Introduction
- 4 Basic settings
- 5 Setting Up the Device
- 6 Overview
- 7 Projected Capacitive Touch Screen
- 8 Planning the Installation
- 9 Installation to a stand
- 10 Connector Panel
- 11 Storage Media
- 12 Installing System to a Wall
- 13 Mounting a Second Display (A1150/D1101)
- 14 Peripherals (optional)
- 15 Starting Up the System
- 16 Error Reporting
- 17 POST Code
- 18 Technical Data
- 19 Appendix
Connector Panel
10.1
10.1 Connecting cables
All devices belonging to the module Beetle A Series that have a separate power cable must be con-
nected to the same electric circuit.
1
1. Tilt the display to the back, and remove the
cable connection cover (1) to uncover the
connector panel.
2. Connect the cables to their assigned ports.
3. Re-attach the cable connection cover.
Copyright © 2020, Diebold Nixdorf
01750342843B
10-2