User's Manual
Table Of Contents
- 1 Manufacturer´s Certification
- 2 Supplier’s Declaration of Conformity
- 3 Introduction
- 4 Basic settings
- 5 Setting Up the Device
- 6 Overview
- 7 Projected Capacitive Touch Screen
- 8 Planning the Installation
- 9 Installation to a stand
- 10 Connector Panel
- 11 Storage Media
- 12 Installing System to a Wall
- 13 Mounting a Second Display (A1150/D1101)
- 14 Peripherals (optional)
- 15 Starting Up the System
- 16 Error Reporting
- 17 POST Code
- 18 Technical Data
- 19 Appendix
Connector Panel
10.2
10.2 Disconnecting cables
Never unplug a cable by pulling on the cable; always take direct hold of the plug itself. Follow the proce-
dure below when disconnecting cables:
• Turn off all power and equipment switches.
• Remove the cable cover.
• Unplug all power plugs from the grounded-contact power sockets.
• Unplug all data communication cables from the sockets of the data networks.
• Unplug all cables from the devices.
Figure10-1: MINI-DIN plugs
1. With MINI-DIN plugs ( Diebold Nixdorf key-
boards), the plug remains inserted until re-
leased.
2. Pull the plastic covering from the connecting
socket with your thumb. The lock is released.
The metal of the plug is visible.
Figure10-2: RJ12 plug
3. To release a RJ12 plug push the latch under
the plug to the top.
Figure10-3: USB-A connector
4. Loosen the USB-A- connector by pulling at
the housing of the connector.
Figure10-4: P-USB connector
5. The P- USB connector is disengaged by
pressing the spring that is marked by an ar-
row.
Copyright © 2020, Diebold Nixdorf
01750342843B
10-3