User's Manual
Table Of Contents
- 1 Manufacturer´s Certification
- 2 Supplier’s Declaration of Conformity
- 3 Introduction
- 4 Basic settings
- 5 Setting Up the Device
- 6 Overview
- 7 Projected Capacitive Touch Screen
- 8 Planning the Installation
- 9 Installation to a stand
- 10 Connector Panel
- 11 Storage Media
- 12 Installing System to a Wall
- 13 Mounting a Second Display (A1150/D1101)
- 14 Peripherals (optional)
- 15 Starting Up the System
- 16 Error Reporting
- 17 POST Code
- 18 Technical Data
- 19 Appendix
12
12 Installing System to a Wall
Unpack the parts from the wall mount kit and check whether the delivery matches the details of the deliv-
ery note.
12.1
12.1 Things you need
The kit contains:
Wall mount back plate
Quantity: 1 piece
Wall mount front plate
Quantity: 1 piece
M4x8 Torx screws
Quantity: 4 pieces
For installation you will need the following (not supplied):
• a drill set
• a Torx screwdriver
• a marker
• 4 pieces of fasteners*
*Fastener types
Fasteners are not included in the wall mount kit. The recommended fastener types to wall mount the sys-
tem are:
Fischer universal plug (UX 6 x 50) (http://www.fischer.de)
Recommended Screw for wall is Pan head self-tapping M5 x 55.
Drill Diameter: 6 mm
Min Hole Depth: 60 mm
Load per anchor for concrete: 60 kg (Safety factor accounted for)
Load per anchor for Solid brick: 30 kg (Safety factor accounted for)
Thorsman wall plug (TP 6 x 30 ) (http://www.thorsman.com)
Recommended Screw for wall is Pan head Wood Screw TGS-C3- 4.8 x 38L
Drill Diameter: 6 mm
Min Hole Depth: 40 mm
Load per anchor for concrete: 40 kg
Load per anchor for Solid brick: 30 kg
Copyright © 2020, Diebold Nixdorf
01750342843B
12-1