User's Manual
Table Of Contents
- 1 Manufacturer´s Certification
- 2 Supplier’s Declaration of Conformity
- 3 Introduction
- 4 Basic settings
- 5 Setting Up the Device
- 6 Overview
- 7 Projected Capacitive Touch Screen
- 8 Planning the Installation
- 9 Installation to a stand
- 10 Connector Panel
- 11 Storage Media
- 12 Installing System to a Wall
- 13 Mounting a Second Display (A1150/D1101)
- 14 Peripherals (optional)
- 15 Starting Up the System
- 16 Error Reporting
- 17 POST Code
- 18 Technical Data
- 19 Appendix
Installing System to a Wall
12.4
12.4 Installation
WARNING
The wall mount plate must be installed by a professional and qualified installer who is fa-
miliar with the building construction methods and the electrical code that are govern by the
local laws on the public access areas.
Use only Diebold Nixdorf wall mount plate.
12.4.1
12.4.1 Fix wall mount back plate to the wall
• Prepare the mounting points penetrating from the wall according to the dimension of the mounting
holes on the back of the system.
• When the system is mounted onto the wall, ensure that the wall mount back plate must be attached
permanently and securely to prevent the system from falling and damaged. Failing to do so may also
cause injury to others.
• Use the recommended fasteners (not supplied) to attach the wall mount back plate onto the concrete
wall.
• Check and ensure that the wall mount back plate is mounted squarely by using a bubble level.
• After installation, ensure that the screw heads are flushed or below the outer surface of the wall
mount back plate.
• Ensure that the wall mount back plate is firmly and securely attached to the wall.
Copyright © 2020, Diebold Nixdorf
01750342843B
12-3