User's Manual
Table Of Contents
- 1 Manufacturer´s Certification
- 2 Supplier’s Declaration of Conformity
- 3 Introduction
- 4 Basic settings
- 5 Setting Up the Device
- 6 Overview
- 7 Projected Capacitive Touch Screen
- 8 Planning the Installation
- 9 Installation to a stand
- 10 Connector Panel
- 11 Storage Media
- 12 Installing System to a Wall
- 13 Mounting a Second Display (A1150/D1101)
- 14 Peripherals (optional)
- 15 Starting Up the System
- 16 Error Reporting
- 17 POST Code
- 18 Technical Data
- 19 Appendix
Installing System to a Wall
12.4.2
12.4.2 Fix wall mount front plate to the system
• Align the 4 mounting holes of the wall mount front plate onto the mounting holes at the back of the
display.
• Secure the wall mount front plate onto the display using the M4 screws provided in the wall mount kit.
12.4.3
12.4.3 Secure the system to the wall
• Ensure that the power cable has been connected onto the system.
• Hook the system with its wall mount front plate installed, onto the wall mount back plate that has
been mounted on the wall. Ensure that the hooks at both sides of the wall mount back plate are se-
curely locked on the slots of the wall mount front plate.
Copyright © 2020, Diebold Nixdorf
01750342843B
12-5