User's Manual
Table Of Contents
- 1 Manufacturer´s Certification
- 2 Supplier’s Declaration of Conformity
- 3 Introduction
- 4 Basic settings
- 5 Setting Up the Device
- 6 Overview
- 7 Projected Capacitive Touch Screen
- 8 Planning the Installation
- 9 Installation to a stand
- 10 Connector Panel
- 11 Storage Media
- 12 Installing System to a Wall
- 13 Mounting a Second Display (A1150/D1101)
- 14 Peripherals (optional)
- 15 Starting Up the System
- 16 Error Reporting
- 17 POST Code
- 18 Technical Data
- 19 Appendix
Technical Data
18.3
18.3 I/O Hub
The I/O Hub (illustration on next page) is an accessory for the Beetle A Series, to extend the number of I/
O ports.
Power input DC24V IN 24V DC, 4A
User interface USB-C (Right) USB Type C, PD 3.0, DP 1.2, UFP
Dual Power Role (5V, 24V/4A)
USB-C (Left) USB Type C, PD 2.0, DP 1.2, DFP
Source only (5V, 12V/2A)
PUSB12V Powered USB 12V, 3A
PUSB24V Powered USB 24V, 3A
COM5, 6 & 7 RJ50 Powered COM ports
5V, 1A combined
12V, 1A combined
LAN RJ45 Gigabit LAN
Cash RJ12 Cash Drawer (12V/24V)
NOTE
Please note that MAX 70W load is allowed for any combination of the interface connec-
tors.
NOTE
A second display attached to the I/O Hub Type-C will not display the BIOS settings menu.
*Refer to next page for illustration.
Copyright © 2020, Diebold Nixdorf
01750342843B
18-5