Specifications

114
7.5.1 Removing electric connections
To remove the electric connections from the equipment:
1. Perform points 1, 2, 3 and 4 of the procedure for removal
of the equipment from the vehicle, described in the
previous chapter.
2. Disconnect the equipment plug from the boom,
lowering the two safety levers (Fig. 1-I0400, pos.1).
3. Position the equipment plug on the false socket of the
same (Fig. 2--I0400, pos.1), fi xing it with the safety levers
(Fig. 2--I0400, pos.2).
4. Move the plug from the boom false socket to the
electric socket (Fig. 3--I0400, pos.1).
5. Fix the plug to the boom socket (Fig. 4--I0400, pos.1) via
the safety levers (Fig. 4--I0400, pos.2).
6. Check that the electric cable is not entangled in the
tool-carrier plate or can be crushed by the equipment
when it is placed on the ground.
7. Proceed with the successive operations to remove the
equipment from the vehicle.
1
1- I0400
1
2
1
2
2- I0400
4- I0400
3- I0400