Specifications

67
5.5.7 Bumper *
* This device is installed only on tunnel baskets
The bumper (Fig. 7-F0100) protects the operator from
bumping into structures and from falling objects or materials
when he/she operates in closed spaces.
5.5.8 Anti-crush limit switch *
* This device is installed only on tunnel baskets
The anti-crush limit switch sensors (Fig. 8-F0100) disable the
boom and basket movements if the equipment bumps into
structures or objects.
In order to enable the movements again, you must use the
reset push-button.
5.5.9 Front infeed micro switch closed *
* This device is installed only on baskets with front
opening
The baskets with front opening are equipped with a micro
switch (Fig. 9-F0100) that prevents the basket from moving
when the door is open or close incorrectly or partially. When
the access door is closed incorrectly, the controls from the
basket are disabled and the latter cannot perform any
movement. The basket control unit signals the “fault” via an
acoustic signal and the operation enablement pilot light.
7- F0100
8- F0100
9- F0100