Operator`s manual

• 16 •
PROBLEM POSSIBLE CAUSE REASON/SOLUTION
CHECK
BATTERY (red)
LED is blinking
Charger is in abort
mode.
See “Aborted Charge”
in the OPERATING
INSTRUCTIONS
Section.
Battery clips
do not spark
when touched
together.
The charger is equipped
with an auto-start feature.
It will not supply current
to the battery clips until
a battery is properly
connected. Meaning,
the clips will not spark if
touched together.
No problem; this is a
normal condition.
BEFORE RETURNING FOR REPAIRS16.
When a charging problem arises, make certain that the battery 16.1
is capable of accepting a normal charge. Double check all
connections, the AC outlet for a full 120 volts, the charger clips
for correct polarity and the quality of the connections from the
cables to the clips and from the clips to the battery system. The
clips must be clean.
When an UNKNOWN OPERATING PROBLEM arises, please 16.2
read the complete manual and call the customer service number
for information that will usually eliminate the need for return.
If the above solutions do not eliminate the problem or
for information about troubleshooting or replacement parts,
call toll-free from anywhere in the U.S.A.
1-800-732-7764
7:00 am to 5:00 pm Central Time Monday through Friday