Operator`s manual

• 9 •
AC POWER CORD CONNECTIONS8.
RISK OF ELECTRIC SHOCK OR FIRE.
This battery charger is for use on a 8.1
nominal 120-volt circuit. The plug must
be plugged into an outlet that is properly
installed in accordance with all local codes
and ordinances. The plug pins must t the receptacle (outlet).
8.2 Never alter the AC cord or plug provided – if it does
not t the outlet, have a proper outlet installed by a qualied
electrician. An improper connection can result in a risk of an
electric shock or electrocution. NOTE: Pursuant to Canadian
Regulations, use of an adapter plug is not allowed in Canada.
Use of an adapter plug in the United States is not recommended
and should not be used.
Recommended minimum AWG size for extension cord:8.3
100 feet long or less – use an 18 gauge extension cord.•
Over 100 feet long – use a 16 gauge extension cord.•
ASSEMBLY INSTRUCTIONS9.
Remove all cord wraps and uncoil the cables prior to using the
battery charger.
FEATURES/CONTROL PANEL 10.
1
2
3
4
5
7
1
3
2
4
4
5
6
6
Amp/Volt Selector Switch1.
Battery Status LEDs2.
AC Power cord 3.
Battery Clamp Cable Assembly4.
Ring Terminal Cable Assembly5.
12V Plug Cable Assembly6.
Charger Quick-Connect Cable7.